
Valve plate – Komatsu HPV140
Quick answer
The HPV140 valve plate is the high/low-pressure porting plate for the Komatsu HPV140 main pump, used on ~40-tonne excavators such as the Komatsu PC400. It times each piston's intake and discharge; when worn it causes internal leakage and a weak pump.
Việt Trung Hải supplies genuine and JIC plates to code that bring flow back, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV140
- Condition
- New, correct code
- Availability
- On request
What the HPV140 valve plate does
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. On the Komatsu HPV140 main pump it carries the full pressure difference between the suction and delivery kidney ports every revolution. The HPV140 is Komatsu's piston main pump for ~40-tonne excavators, typically the PC400.
Signs it needs replacing
Scoring or erosion around the ports, blue heat discoloration, loss of flatness, rising internal leakage, weak or slow pump delivery, and metal debris in the hydraulic oil.
Choosing quality
A worn valve plate drags down the whole pump, so material hardness and surface flatness are decisive. Việt Trung Hải supplies Komatsu HPV140 valve plates, genuine and JIC — the JIC one is hardened steel with the sealing face lapped to the HPV140 interchange tolerance, so flow comes back once it is fitted to a standard pump. Call VTH for a fast quote.
Frequently asked questions
Which excavator does the HPV140 valve plate fit?
The HPV140 is Komatsu's piston main pump for ~40-tonne excavators, typically the Komatsu PC400. A correct HPV140 valve plate matches the kidney ports and sealing face to that pump's cylinder block, keeping oil distribution timed correctly.
How do I know the valve plate is worn?
Check the sealing face for scoring, grooves, pitting, or blue burn marks around the ports. Slow or weak pump delivery, unusual heat, or metal debris in the hydraulic oil also point to internal leakage from a worn valve plate that needs replacing.
Does the pump need re-setting after a new HPV140 plate goes in?
The plate itself needs no setting. The JIC part is made to the HPV140 code and interchange tolerance, so fitted the right way round and torqued down the pump delivers its normal flow; just bleed the system and check pressure as usual. Việt Trung Hải also carries genuine plates and quotes fast.
Get a quote
Request a quote: Valve plate – Komatsu HPV140
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVPin – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVBall guide – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVCylinder block – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV132HPV132On requestView · get a quoteTechnical handbook