Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston – Komatsu HPV140

Komatsu · HPV

Piston – Komatsu HPV140

New, correct codeOn requestHPV140

Quick answer

The HPV140 piston (bi bơm) reciprocates inside a Komatsu HPV axial-piston pump to build flow and pressure; this main pump powers ~40-tonne excavators such as the Komatsu PC400.

Việt Trung Hải supplies genuine and JIC HPV140 pistons, coded and toleranced for the original block, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston
Brand / pump line
Komatsu · HPV
Model code
HPV140
Condition
New, correct code
Availability
On request

HPV140 piston — which pump and machine

The piston (bi bơm) reciprocates inside the cylinder block of an axial-piston pump. Each piston carries a slipper that rides on the swash plate; as the block rotates, the pistons draw and discharge hydraulic oil to build the system's flow and pressure. The Komatsu HPV140 is a main pump in Komatsu's HPV family, fitted to ~40-tonne excavators such as the Komatsu PC400. Pistons must match the cylinder block and swash plate by correct part code.

Signs of wear

Scored or pitted piston surfaces, worn slippers with excess clearance, internal leakage, weak pump output, sluggish operation when the oil is hot, and metal particles in the hydraulic oil.

Choosing quality parts

Worn pistons cut pump efficiency and can damage the cylinder block and swash plate. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies genuine and JIC HPV140 pistons, held to the fitting dimensions of the original, so a worn set swaps out and the pump goes back together as it was. Contact us for part matching and a fast quote.

Frequently asked questions

Which excavator does the HPV140 piston fit?

The HPV140 piston belongs to the Komatsu HPV main pump, used on ~40-tonne excavators such as the Komatsu PC400. Match the piston set to the pump cylinder block and swash plate by correct part code for proper fit and sealing.

How do I know the pump pistons are worn?

Common signs are scored or peeling piston surfaces, worn slippers with clearance, weak pump output, sluggish operation when the oil is hot, and metal particles in the hydraulic oil. Inspect and replace the piston set with related parts as needed.

How do I pick the right HPV140 piston code for my pump?

Read the code off the pump nameplate, note your machine serial and send both to Việt Trung Hải; we match them to the HPV140 build and pull the right set. As an authorized JIC Hydraulics distributor we hold JIC and genuine parts to that code, with a fast quote.

Get a quote

Request a quote: Piston – Komatsu HPV140

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides