
Pin – Komatsu HPV140
Quick answer
The HPV140 rotary group is the rotating assembly that generates flow and pressure inside the Komatsu HPV140 main pump, used on PC400-class excavators around 40 tonnes.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies it in genuine Komatsu and JIC form, each to the correct code and fitting the original pump housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV140
- Condition
- New, correct code
- Availability
- On request
HPV140 rotary group — pump and machine
The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the pump's flow and pressure. This HPV140 rotary group fits the Komatsu HPV140 main pump on PC400-class excavators, around 40 tonnes.
When to replace
As the block and pistons wear, clearance opens up and the machine loses power, lifts slowly and bogs down under load. A scored valve plate or swash plate brings pressure loss, abnormal heat and knocking or whining. Metal in the oil means the group is failing and should be replaced before it damages the pump body.
Choosing quality parts
Under high pressure and constant friction, material, heat treatment and machining precision decide service life. Việt Trung Hải is an authorized JIC Hydraulics distributor and supplies the HPV140 rotary group in genuine Komatsu and in JIC form — the JIC set is made to the same code, with tight clearances and a hard valve face, so it runs full flow in the original pump housing. Contact us for a fast quote.
Frequently asked questions
Which excavator does the HPV140 rotary group fit?
The HPV140 rotary group is for the Komatsu HPV140 main pump, fitted on PC400-class excavators around 40 tonnes. When requesting a quote, send your machine model and pump serial number so Việt Trung Hải can confirm the exact rotary group configuration.
Should I replace the whole rotary group or just pistons and valve plate?
If only a few parts are lightly worn, individual pistons or the valve plate can be replaced. But when the block, pistons and swash plate are worn together, or there is metal in the oil, replace the full rotary group to restore stable flow and pressure.
What details do you need to order an HPV140 rotary group?
Send the code cast on the pump body, the serial number and the PC400 model year, plus photos of the valve face and block if the pump is already open. Việt Trung Hải matches it and ships the correct HPV140 code — genuine Komatsu or JIC, which as JIC's authorized distributor we supply to fit the original housing.
Get a quote
Request a quote: Pin – Komatsu HPV140
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVBall guide – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVCylinder block – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV132HPV132On requestView · get a quoteTechnical handbook