Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Komatsu HPV35

Komatsu · HPV

Valve plate – Komatsu HPV35

New, correct codeOn requestHPV35

Quick answer

The Komatsu HPV35 valve plate is the porting plate against the cylinder block that times each piston's intake and discharge on the HPV35 main pump used in smaller Komatsu excavators.

Việt Trung Hải supplies JIC Hydraulics plates cut to code that fit a standard pump, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Komatsu · HPV
Model code
HPV35
Condition
New, correct code
Availability
On request

Valve plate HPV35 — which pump it fits

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. On the Komatsu HPV35 main pump — an axial-piston unit used on smaller, compact Komatsu excavators — it opens and closes the oil ports in sync with rotation to hold steady flow and pressure. Match the exact HPV35 code so the face seals against the block.

Signs of wear

Scoring, pitting, heat discoloration or uneven wear let oil leak from the high- to the low-pressure side: weak pump, slow machine, overheating oil, metal particles in the fluid. A valve plate that loses flatness drops pump output and should be replaced early to avoid damage spreading to the cylinder block and pistons.

Choosing quality parts

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC valve plates — hardened material, a wear-resistant surface, precision lapping for flatness, and dimensions inside the HPV35 interchange tolerance, so the plate fits a standard pump and holds full pressure. HPV35 in stock with fast quotes.

Frequently asked questions

Which pump and machine does the HPV35 valve plate fit?

It fits the Komatsu HPV35 axial-piston main pump used on smaller, compact Komatsu excavators. Order the exact HPV35 code so the face seals against the cylinder block, and share your machine model so Việt Trung Hải can confirm the right part.

When should the valve plate be changed?

Change it when the sealing face is deeply scored, pitted, heat-discolored or no longer flat, with symptoms like weak pump output, a slow machine, hot oil or metal particles. Acting early keeps the damage from spreading to the cylinder block and pistons.

Will a new plate on its own fix a weak HPV35 pump?

Sometimes. A scored or unflat valve plate is a common cause, but worn pistons, block and slipper shoes also bleed pressure. Open the pump, check the whole group, then change what is actually worn. Việt Trung Hải keeps HPV35 plates from JIC, cut to code, and quotes by pump code.

Get a quote

Request a quote: Valve plate – Komatsu HPV35

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides