Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Shoe plate – Komatsu HPV35 (rear)

Komatsu · HPV

Shoe plate – Komatsu HPV35 (rear)

New, correct codeOn requestHPV35

Quick answer

The HPV35 rear shoe plate holds the piston shoes flat against the swash plate in the rear section of Komatsu's tandem HPV35 main pump (compact excavators), keeping them seated and evenly loaded.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Shoe plate
Brand / pump line
Komatsu · HPV
Model code
HPV35
Condition
New, correct code
Availability
On request

What the HPV35 rear shoe plate is

The rear shoe plate is the retainer for the rear pump section of Komatsu's tandem HPV35 main pump. As the cylinder block turns, it presses the piston shoes flat against the swash plate, keeping every shoe seated and evenly loaded through each revolution. HPV35 is a compact main pump fitted to smaller Komatsu excavators. This part holds the shoes — unlike the swash plate, and it does not set displacement.

Signs of trouble

When the rear plate wears, cracks or slackens, the shoes tilt and lift off the swash plate and the oil-film seal breaks. Expect a weak pump, slow lift, lost output at high rpm, unstable flow, hot oil and metal in the fluid. Inspect the plate together with the shoes and pistons.

Choosing the right part

The plate must be hard, flat and hold even force so the shoes glide without scoring. The JIC HPV35 rear plate is cut to the same code and the same interchange tolerances, so it seats in the original housing as it comes. Việt Trung Hải distributes JIC Hydraulics under authorization and also carries genuine Komatsu. Fast quote by code.

Frequently asked questions

Where is the HPV35 rear shoe plate?

In the rear section of the tandem HPV35 main pump, holding that section's piston shoes against the swash plate.

What are the symptoms of a worn shoe plate?

Lifting shoes, internal leakage, a weak pump, lost power at high rpm, unstable flow, hot oil and metal debris.

Do you stock the HPV35 rear shoe plate?

Yes — genuine Komatsu and JIC plates to the rear code, each fitting straight into the original housing. Fast quote.

Get a quote

Request a quote: Shoe plate – Komatsu HPV35 (rear)

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides