
Cylinder block – Komatsu HPV35
Quick answer
The Komatsu HPV35 cylinder block is the barrel of piston bores inside the HPV-series main piston pump, setting the pump's flow and pressure on compact Komatsu excavators.
Việt Trung Hải stocks the HPV35 block genuine and from JIC, each cut to the code and to interchange tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV35
- Condition
- New, correct code
- Availability
- On request
What the HPV35 cylinder block does
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside them to draw and push oil. It is the core rotating part of Komatsu's HPV-series main piston pump and sets the pump's flow and pressure build. The HPV35 sits at the smaller end of the HPV family, fitting compact Komatsu excavators.
Signs it needs replacing
A scored or pitted valve-plate face causes internal leakage and slow or weak pressure. Worn piston bores add clearance, so the machine loses power and slows under load, often with hot oil and knocking.
Choosing quality
Material, bore accuracy and surface flatness decide service life. Việt Trung Hải stocks the HPV35 block genuine and from JIC; as an authorized JIC Hydraulics distributor we get parts cut to the HPV35 code and to interchange tolerance, so the block seats in the original pump housing straight away. Ask us for a fast quote and help on your pump generation.
Frequently asked questions
Which pump and machine does the HPV35 block fit?
It is the cylinder block for Komatsu's HPV-series main piston pump; the HPV35 is a smaller member of the family, used on compact Komatsu excavators. Send your pump code or machine model and Việt Trung Hải will confirm the fit before quoting.
How do I know the cylinder block has failed?
Common signs are slow or weak pressure build, power loss under load, oil heating up fast and knocking inside the pump. On teardown, a scored or pitted valve-plate face or worn, loose piston bores confirm the block should be replaced.
What do you need from me to pick the right HPV35 block?
Send the numbers stamped on the pump body, the machine model, and a photo of the old block face. The HPV35 family differs in block thickness and shaft spline, so we match those first, then pick the genuine or the JIC block to code and quote fast.
Get a quote
Request a quote: Cylinder block – Komatsu HPV35
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV35 (rear)HPV35On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV35 (front)HPV35On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV132HPV132On requestView · get a quoteTechnical handbook