
Uchida/Rexroth · AP2D
Retainer plate – Rexroth-Uchida AP2D36
Quick answer
The AP2D36 (Rexroth-Uchida) port plate and ball guide hold the piston shoes at the correct angle against the swash plate in the AP2D main pump used on mini excavators.
Việt Trung Hải supplies genuine and JIC parts to the same code and fit tolerance, so the clearance is right in the original housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Uchida/Rexroth · AP2D
- Model code
- AP2D36
- Condition
- New, correct code
- Availability
- On request
What the AP2D36 port plate fits
The ball guide and port plate steer and hold the piston shoes at the correct angle against the swash plate through the pump's rotation. This set sits inside the Rexroth-Uchida AP2D main pump — an axial-piston pump used on mini excavators. Fit code AP2D36 to the matching AP2D36 pump body so the shoes stay flat and the pump holds pressure and flow.
Signs of wear
When the shoe pockets open up or the ball guide scores, the shoes go loose and tilt, losing contact with the swash plate. Typical signs: a weak pump, slow pressure build, lost flow, sluggish work and an unusual whine, with scoring on the swash plate. Replace the set to protect the cylinder block.
Choosing quality parts
Material, heat treatment and surface flatness decide how long this set lasts. Việt Trung Hải holds genuine stock for the AP2D36 and, as JIC Hydraulics' authorized distributor, ships the JIC plate to the same code and fit tolerance, so it torques down in the original housing at the right clearance. Send your pump code and photos for a fast quote.
Frequently asked questions
Which machine does the AP2D36 port plate fit?
The AP2D36 port plate sits inside the Rexroth-Uchida AP2D main pump, an axial-piston pump common on mini excavators. Send the code stamped on your pump body so we can confirm the exact part before quoting.
When should the port plate and ball guide be replaced?
Replace them when the piston shoes go loose or tilt, the pump weakens, pressure builds slowly, or you hear an unusual whine. If the shoe pockets are worn open or the face is pitted, change the whole set to protect the cylinder block.
The pump is still weak after a new AP2D36 plate — what next?
Check the shoes and pistons for play and the block face for pitting, then the swash plate, the shaft seal and the flow regulator; a dirty filter or thin oil will pull the pump down too. The JIC AP2D36 plate Việt Trung Hải ships is to code and to clearance, so if the pump is still soft, the fault sits elsewhere.
Get a quote
Request a quote: Retainer plate – Rexroth-Uchida AP2D36
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · AP2DRotary group kit – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPiston pump – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DDrive shaft – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DSwash plate – Uchida/Rexroth AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DShoe plate – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DValve plate – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPin – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPiston – Uchida AP2D36AP2D36On requestView · get a quoteTechnical handbook