Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Rexroth-Uchida AP2D36

Uchida/Rexroth · AP2D

Pin – Rexroth-Uchida AP2D36

New, correct codeOn requestAP2D36

Quick answer

The Rexroth-Uchida AP2D36 rotary group — cylinder block, pistons, valve plate and swash plate — generates the flow and pressure of the AP2D36 main pump used on mini and compact excavators.

Việt Trung Hải supplies AP2D36 groups in genuine and JIC form, each machined to the correct code for the original housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · AP2D
Model code
AP2D36
Condition
New, correct code
Availability
On request

What the AP2D36 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure. The Rexroth-Uchida AP2D36 rotary group is the turning core of the AP2D36 main pump, a piston pump used widely on mini and compact excavators.

Signs it needs replacing

Weak pump and pressure loss; slow boom, swing and travel; oil heating fast; metal flakes in the drain; a whine or knock inside the pump. These point to a scored block and pistons, or a pitted valve plate and swash plate.

Choosing quality parts

The rotary group sets the pump's pressure, so material and machining decide its life. Việt Trung Hải — an authorized JIC Hydraulics distributor — carries the AP2D36 group in genuine form and as JIC's own set: block, pistons, valve plate and swash plate to the correct code, hardened steel, ground to the same fitting tolerance so the stack mates and loads evenly. Contact us for a fast quote.

Frequently asked questions

Which machines use the AP2D36 rotary group?

The AP2D36 is a Rexroth-Uchida piston main pump fitted to mini and compact excavators. Its rotary group covers the block, pistons, valve plate and swash plate. Send us your pump code and machine model so Việt Trung Hải matches the right set.

When should the AP2D36 rotary group be replaced?

Replace it when the pump goes weak, pressure drops, boom and travel feel sluggish, oil heats up fast, or you find metal flakes and knocking. These signal a scored block and pistons or a pitted valve plate and swash plate, so act before the whole pump fails.

What else should I change when fitting an AP2D36 rotary group?

Fit new seals, gaskets and washers with the group, flush the lines and change the filter — metal from the earlier failure is still in the system. Việt Trung Hải supplies the AP2D36 set to code with those parts, genuine or JIC, as JIC Hydraulics' authorized distributor.

Get a quote

Request a quote: Pin – Rexroth-Uchida AP2D36

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides