
Uchida/Rexroth · AP2D
Drive shaft – Uchida AP2D36
Quick answer
The Rexroth-Uchida AP2D36 drive shaft transmits torque from the engine into the cylinder block of the AP2D36 piston pump, a main pump on mini and small excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts on the correct code — send your pump code and spline count for a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Uchida/Rexroth · AP2D
- Model code
- AP2D36
- Condition
- New, correct code
- Availability
- On request
What the AP2D36 drive shaft fits
The drive shaft transmits torque from the engine into the cylinder block to turn the pump's rotary group. This shaft is for the Rexroth-Uchida AP2D36 piston pump, a main pump on mini and small excavators. It couples through a spline, so the tooth count and the front/rear position must match your pump assembly.
When to replace
Worn or loose splines let the block run unevenly and knock under load. A scored shaft neck at the seal lets oil leak out. In severe cases the shaft cracks or twists from fatigue. Replace early to avoid damaging the block and bearings.
Choosing the right part
The shaft carries high, varying torque, so alloy steel, spline-surface hardness and concentricity decide its life. Việt Trung Hải takes AP2D36 shafts straight from JIC Hydraulics as its authorized distributor — JIC code, correct tooth count and length, meshing with the original cylinder block on the first try. Genuine shafts run alongside. Send your pump code and spline count for a fast quote.
Frequently asked questions
Which excavators use the AP2D36 drive shaft?
The AP2D36 is a piston pump in the Rexroth-Uchida AP2D family, used as the main pump on mini and small excavators. To pick the right shaft, confirm the spline tooth count and whether it mounts at the front or rear of the pump.
How do I know the drive shaft needs replacing?
Common signs are loose splines that knock under load, a scored shaft neck leaking oil at the seal, or unusual vibration. In severe cases the shaft cracks or twists from fatigue and must be replaced right away.
Does Việt Trung Hải stock the AP2D36 drive shaft?
Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries the AP2D36 shaft in genuine and JIC, both on the correct code and spline count. Send your pump code and tooth count and we will check stock and quote quickly.
Get a quote
Request a quote: Drive shaft – Uchida AP2D36
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · AP2DRotary group kit – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPiston pump – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DSwash plate – Uchida/Rexroth AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DShoe plate – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DRetainer plate – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DValve plate – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPin – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPiston – Uchida AP2D36AP2D36On requestView · get a quoteTechnical handbook