
Uchida/Rexroth · AP2D
Swash plate – Uchida/Rexroth AP2D36
Quick answer
The AP2D36 swash plate is the fixed angled plate in the Uchida/Rexroth AP2D main pump on higher-output mini excavators; its tilt sets pump flow.
Việt Trung Hải stocks genuine and JIC parts to the correct code.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Swash plate
- Brand / pump line
- Uchida/Rexroth · AP2D
- Model code
- AP2D36
- Condition
- New, correct code
- Availability
- On request
What the Uchida/Rexroth AP2D36 swash plate fits
The swash plate is the fixed, angled plate inside the Uchida/Rexroth AP2D main pump. The full set of piston shoes slides across its face together as the cylinder block turns; the plate's tilt angle sets piston stroke and the pump's oil flow. AP2D is a family of small axial-piston pumps common on mini excavators, and the AP2D36 is a larger member of the range serving higher-output mini machines. A flat, mirror-smooth face keeps flow and pressure even.
Wear signs
- A thinned, scored or pitted sliding face that has lost its oil film.
- Weak pump output, slow pressure build and knocking.
- Fast-heating hydraulic oil with metal debris in it.
- Even a few score lines on the face drag the whole pump's efficiency down.
A damaged face wears the piston shoes with it, so replace the set before the damage spreads to the cylinder block.
Choosing quality parts
An AP2D36 pump on a mini excavator works at high pressure, so the plate is squeezed and scrubbed by the shoes at the same time; the steel base and the hard surface layer have to be right or the face dishes early. Việt Trung Hải is an authorized JIC Hydraulics distributor and supplies the AP2D36 plate on code — genuine parts and JIC parts, the JIC one cut to the original fitting sizes so it runs true in a standard Uchida/Rexroth housing. Send your pump code for fast advice and a quote.
Frequently asked questions
Which pump family is the AP2D36?
The small AP2D axial-piston family; the AP2D36 is a larger size for higher-output mini excavators.
When should it be replaced?
When the face is thinned, scored or pitted, the pump is weak, pressure builds slowly, oil overheats and there is metal debris.
Does the regulator need resetting after the plate goes in?
Not from scratch, but check the regulator and the working pressure once it is back together. The JIC AP2D36 plate is on code and on fitting size, so the tilt returns to where it was.
Get a quote
Request a quote: Swash plate – Uchida/Rexroth AP2D36
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · AP2DRotary group kit – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPiston pump – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DDrive shaft – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DShoe plate – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DRetainer plate – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DValve plate – Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPin – Rexroth-Uchida AP2D36AP2D36On requestView · get a quote
Uchida/Rexroth · AP2DPiston – Uchida AP2D36AP2D36On requestView · get a quoteTechnical handbook