Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Retainer plate – Kawasaki MX80

Kawasaki · MX

Retainer plate – Kawasaki MX80

New, correct codeOn requestMX80

Quick answer

The Kawasaki MX80 ball guide and port plate sit in the rotating group of a Kawasaki MX-series travel motor, holding the piston shoes at the correct angle against the swash plate as it turns.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the official JIC set and genuine parts to code MX80, ready to fit the original motor, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · MX
Model code
MX80
SKU
2021-590-1-91
Condition
New, correct code
Availability
On request

Kawasaki MX80 ball guide & port plate — where it fits

The MX80 ball guide and port plate sit in the rotating group of a Kawasaki MX-series travel motor. They steer and hold the piston shoes at the correct angle against the swash plate throughout rotation, keeping the pistons seated, sealed and driving evenly. MX travel motors run the propel drive on crawler excavators, so these parts take constant load and shock.

When to replace

Watch for weak or slow travel, one track pulling to a side, scored spherical and shoe-pocket surfaces, shoe play, internal leakage, fast oil heating, knocking, or metal debris in the oil.

Choosing quality parts

Correct hardness, heat treatment and precise machining keep the shoes tight against the swash plate. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the official JIC MX80 set — spherical face and shoe pockets cut to the interchange tolerances, so it goes into the travel motor you already have and beds in straight away. Genuine parts are on the shelf too; contact us for a fast quote.

Frequently asked questions

Which motor does the MX80 ball guide and port plate fit?

It belongs to the rotating group of a Kawasaki MX-series travel motor, typically on crawler excavators. Send your motor code or machine model and Việt Trung Hải will confirm the exact match before quoting.

When should I replace the ball guide and port plate?

Check them when travel is weak or pulls to one side, shoes feel loose, the spherical and shoe-pocket surfaces are scored, oil heats quickly, or you find metal debris. Changing them in time keeps the damage from spreading to the swash plate and cylinder block.

Is the JIC part made to the MX80 code so it fits as it is?

Yes. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC ball guide and port plate to code MX80, with the spherical face and shoe pockets held to the interchange tolerances — no reaming or lapping in on the original motor. Contact us for advice and a fast quote.

Get a quote

Request a quote: Retainer plate – Kawasaki MX80

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides