
Kawasaki · MX
Valve plate – Kawasaki MX80
Quick answer
The Kawasaki MX80 valve plate is the high/low-pressure porting plate pressed against the cylinder block, timing each piston's intake and discharge in Kawasaki's MX-series axial-piston unit.
Việt Trung Hải supplies genuine and JIC MX80 plates to code as an authorized distributor — fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · MX
- Model code
- MX80
- SKU
- 2021-590-1-151
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki MX80 valve plate fits
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The MX80 code belongs to Kawasaki's MX-series axial-piston unit used on excavators. Its sealing face and kidney ports must stay perfectly tight for flow and pressure to hold steady — this is the wear part that decides how the unit performs.
Signs it needs replacing
Scoring, pitting or grooving on the sealing face, discoloration from overheating, a weak or slow pump, loss of power under load, fast-heating oil, unusual noise, or metal particles in the oil all point to a worn valve plate. Inspect the cylinder block and pistons at the same time.
Choosing a quality plate
Material, flatness and surface hardness decide how long the plate keeps sealing. Việt Trung Hải supplies the Kawasaki MX80 valve plate as a genuine part and as a JIC part — JIC Hydraulics machines it to the code and to size, and we sell it as an authorized distributor, so you know where it came from. Contact VTH for a fast quote.
Frequently asked questions
Which machine does the Kawasaki MX80 valve plate fit?
The MX80 belongs to Kawasaki's MX-series axial-piston unit used on excavators. Send the machine model and the code on your pump or motor nameplate, and Việt Trung Hải will confirm the exact valve plate before quoting.
How do I know the valve plate has failed?
A scored, pitted, grooved or discolored sealing face, together with a weak pump, slow digging, fast-heating oil and metal particles, signals internal leakage. Replace the plate and inspect the cylinder block and pistons at the same time.
Can I buy the MX80 plate on its own, or do I need the whole rotary group?
On its own is fine. If the block and pistons are still good, a correct-code MX80 plate is all it takes. Where the group is worn, Việt Trung Hải has the remaining parts — genuine and JIC, sold as an authorized distributor — so everything is renewed together.
Get a quote
Request a quote: Valve plate – Kawasaki MX80
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · MXRotary group kit – Kawasaki MX80MX80On requestView · get a quote
Kawasaki · MXRetainer plate – Kawasaki MX80MX80On requestView · get a quote
Kawasaki · MXPiston – Kawasaki MX80MX80On requestView · get a quote
Kawasaki · MXBall guide – Kawasaki MX80MX80On requestView · get a quote
Kawasaki · MXCylinder block – Kawasaki MX80MX80On requestView · get a quote
Kawasaki · MXRotary group kit – Kawasaki MX150MX150On requestView · get a quote
Kawasaki · MXRotary group kit – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXRotary group kit – Kawasaki MX750MX750On requestView · get a quoteTechnical handbook