Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Kawasaki K5V140DT

Kawasaki · K5V

Ball guide – Kawasaki K5V140DT

New, correct codeOn requestK5V140DT

Quick answer

The Kawasaki K5V140DT ball guide steers and holds the piston shoes at the correct angle against the swash plate in the main pump, fitting ~20-ton excavators such as the Kobelco SK210 and Doosan DX225.

Việt Trung Hải supplies genuine and JIC parts to code that fit the original pump as they are, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · K5V
Model code
K5V140DT
SKU
2021-590-1-201
Condition
New, correct code
Availability
On request

What the K5V140DT ball guide fits

The ball guide sits inside the piston group of the main pump. It holds the retainer and piston shoes at the correct angle against the swash plate throughout each rotation, so the pistons load evenly and flow stays steady. This ball guide belongs to the Kawasaki K5V140DT main pump, used on ~20-ton crawler excavators such as the Kobelco SK210 and Doosan DX225.

When to replace

Scoring, pitting or wear on the spherical face lets the shoes tilt off the swash plate. The machine loses power, lifts slowly, the pump grows noisy and metal shows up in the oil. Left too long, a shoe can lift off its piston and wreck the whole rotary group.

Choosing quality parts

As an authorized JIC Hydraulics distributor, Việt Trung Hải delivers the JIC K5V140DT ball guide to code, to hardness and to fitting tolerance — it goes onto the original retainer and shoe plate with nothing to adjust. Genuine parts stay on the shelf too. Call us for a fast quote and the right pump match.

Frequently asked questions

Which excavators use the K5V140DT ball guide?

It is a part of the Kawasaki K5V140DT main pump, typically fitted on ~20-ton crawler excavators such as the Kobelco SK210 and Doosan DX225. Send Việt Trung Hải your machine and pump model to confirm the right part.

How do I know the ball guide is worn?

A scored or pitted face makes the machine lose power, lift slowly, and the pump grows noisy with metal in the oil. Inspect it during any pump overhaul and replace it with the rotary group if needed.

Does a JIC K5V140DT ball guide need any rework on the pump?

No. It is made to the K5V140DT code and to fitting tolerance, so it drops into the original rotary group with no honing or lapping. Việt Trung Hải is an authorized JIC Hydraulics distributor and stocks genuine parts as well, with fast quotes.

Get a quote

Request a quote: Ball guide – Kawasaki K5V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides