Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Front drive shaft – Kawasaki K5V140DT

Kawasaki · K5V

Front drive shaft – Kawasaki K5V140DT

New, correct codeOn requestK5V140DT

Quick answer

The Kawasaki K5V140DT front drive shaft is the engine-side input shaft for the K5V140DT main pump on ~20-ton excavators like the Kobelco SK200/SK210 and Doosan DX225.

Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine and JIC shafts to the correct code, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K5V
Model code
K5V140DT
SKU
2021-590-1-29
Condition
New, correct code
Availability
On request

What the K5V140DT front shaft fits

The Kawasaki K5V140DT front drive shaft is the input shaft — the end that takes torque straight from the engine, unlike the rear shaft that couples to the second group of a tandem pump. It turns the cylinder block to drive the pump's rotary group.

The K5V140DT is the main piston pump on ~20-ton excavators such as the Kobelco SK200/SK210 and Doosan DX225. As the input side, its splines and engine-side coupling carry constant rotating and vibration load.

Signs it needs replacing

Replace the shaft when worn splines cause knocking and heavy vibration under throttle, when a scored seal surface leaks oil at the pump nose, or when the shaft runs out of true or shows chipped teeth.

Choosing a quality part

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies K5V140DT shafts genuine and JIC. The JIC shaft is machined to the same code and spline profile, so it seats tightly in the original pump and runs smooth from the first start. Contact us for a fast quote.

Frequently asked questions

How do the front and rear K5V140DT shafts differ?

The front shaft is the input, taking drive straight from the engine; the rear shaft couples to the second group of a tandem pump. They differ in profile and position and are not interchangeable, so specify front or rear when ordering.

Which excavators use the K5V140DT pump?

The K5V140DT is the main pump on roughly 20-ton excavators, commonly the Kobelco SK200/SK210 and Doosan DX225. The front drive shaft is this pump's input shaft. Việt Trung Hải supplies the correct part with a fast quote.

Does the JIC shaft fit the original K5V140DT pump housing?

It does. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC shaft is machined to the K5V140DT code, spline profile and seal journal, so it goes into the original housing as it comes, with no fitting work. Genuine shafts are on the shelf too.

Get a quote

Request a quote: Front drive shaft – Kawasaki K5V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides