Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Spring – Kawasaki K5V140DT

Kawasaki · K5V

Spring – Kawasaki K5V140DT

New, correct codeOn requestK5V140DT

Quick answer

The Kawasaki K5V140DT spring is the elastic element in the pump rotary group that holds the cylinder block against the valve plate and preloads the piston shoes, so the pump seals from startup. The K5V140 is the main pump on ~20-ton excavators such as the Kobelco SK210 and Doosan DX225.

Việt Trung Hải supplies K5V140DT springs, genuine and JIC, at the correct code and free length for a direct fit, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K5V
Model code
K5V140DT
SKU
2021-590-1-127
Condition
New, correct code
Availability
On request

The spring inside the Kawasaki K5V140DT rotary group holds the cylinder block against the valve plate and preloads the piston shoes onto the swash plate before hydraulic pressure builds — sealing the pump from startup and keeping the rotating group in even contact.

Which pump and machine

The K5V140 is the main piston pump on ~20-ton excavators such as the Kobelco SK210 and Doosan DX225. The spring lives inside the rotary group — cylinder block, pistons, valve plate, swash plate and drive shaft.

Signs it needs replacing

A fatigued, weak or broken spring lets the block lift off at low idle: hard, weak startup, sluggish response, internal leakage, sometimes a knock inside the pump. Replace it during a rotary-group overhaul.

Genuine quality

Correct free length, spring rate and heat-treated spring steel keep the preload stable. Việt Trung Hải, a JIC Hydraulics distributor, supplies K5V140DT springs from the pump maker and from JIC, same code and same wound dimensions, dropping into the standard block at full load. Fast quotes.

Frequently asked questions

Which excavators use the K5V140DT spring?

The K5V140 main pump fits roughly 20-ton excavators, commonly the Kobelco SK210 and Doosan DX225 and equivalent models. The spring sits inside the rotary group; send your pump code and machine model with your enquiry so we match the exact part.

How do I know the pump spring is weak?

Common signs are hard, weak hydraulics at cold start or low idle, sluggish response, internal leakage and sometimes a knocking noise. Inspect and replace the spring during a rotary-group overhaul to avoid scoring the valve plate and block.

Should I replace just the spring or the whole rotary group?

It depends on condition. If the block, pistons and valve plate are still good, the spring alone is enough; if the rotary group is worn, replace the whole set. Việt Trung Hải supplies both the standalone K5V140DT spring and complete rotary groups.

Get a quote

Request a quote: Spring – Kawasaki K5V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides