Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Kawasaki K5V140DT

Kawasaki · K5V

Rotary group kit – Kawasaki K5V140DT

New, correct codeOn requestK5V140DT

Quick answer

The K5V140DT rotary group is the rotating assembly inside a Kawasaki K5V piston pump, fitting newer ~20-ton excavators such as the Kobelco SK210 and Doosan DX225.

Việt Trung Hải supplies JIC groups ground to the correct code that seat in the original housing, alongside genuine Kawasaki parts, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K5V
Model code
K5V140DT
SKU
2021-43523
Condition
New, correct code
Availability
On request

What the K5V140DT rotary group fits

The K5V140DT rotary group is the rotating assembly inside a Kawasaki K5V piston pump, commonly fitted to newer ~20-ton excavators such as the Kobelco SK210 and Doosan DX225. It generates the pump's flow and pressure.

The group contains the cylinder block, pistons, valve plate, swash plate and drive shaft. As these surfaces wear, internal clearance opens up and oil leaks past them.

When to replace it

Typical signs: the machine weakens as the oil heats up, slow lift or lost flow under load, and unusual noise from the pump. A scored valve plate or worn cylinder block is often the cause, and fitting a new rotary group costs less than a whole pump.

Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC valve plate and block are ground to the K5V140DT code, so the group seats in the original housing and the pump comes back to full flow with nothing to machine at assembly. Genuine Kawasaki parts are stocked as well. Contact us for a fast quote.

Frequently asked questions

Which machines use the K5V140DT rotary group?

It fits Kawasaki K5V piston pumps, commonly on newer ~20-ton excavators such as the Kobelco SK210 and Doosan DX225. Send us the pump code and we will confirm the exact match for your machine.

Replace the rotary group or the whole pump?

If the housing and regulator are still good and only the cylinder block, valve plate or swash plate are worn, a new rotary group is enough and costs less than a full pump. We can advise once we see the pump's condition.

Do you have stock and how do I get a quote?

Send Việt Trung Hải the K5V140DT code and your machine model; we check stock and quote quickly. As an authorized JIC Hydraulics distributor we supply JIC rotary groups cut to the code that fit the original housing as they come.

Get a quote

Request a quote: Rotary group kit – Kawasaki K5V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides