
Retainer plate – Komatsu HPV90
Quick answer
The Komatsu HPV90 port plate is the distribution plate whose kidney ports time oil suction and discharge in the HPV90/HPV95 main pump on the roughly 20-tonne Komatsu PC200 excavator.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine parts and JIC parts to the same code and clearance, with a fast quote once you share the machine and pump number.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV90
- Condition
- New, correct code
- Availability
- On request
The port plate is the fixed distribution plate at the end face of the cylinder block inside the main pump. Its kidney-shaped ports open the suction and discharge passages at the right moment as the cylinder block rotates against the plate, letting the pistons draw oil in and push it out on cycle. The face must stay flat, hard and smooth to seal under pressure.
Which pump the HPV90 port plate fits
This part suits the Komatsu HPV90 and HPV95 family main pump — the axial piston pump on the roughly 20-tonne Komatsu PC200 excavator.
When to replace
Scoring, pitting or wear around the kidney ports means rising internal leakage: weak pump, slow boom, poor power under load, oil heating quickly. Inspect the mating cylinder block face at the same time.
Choosing quality
Việt Trung Hải is an authorized JIC Hydraulics distributor and stocks the HPV90 port plate in genuine Komatsu and in JIC. The JIC plate carries the same code, the same kidney-port layout and the same fit tolerances, so it seats flat on the block inside the original housing and holds the working clearance. Send your machine and pump number for a fast quote.
Frequently asked questions
Which excavator does the HPV90 port plate fit?
The HPV90 port plate belongs to the Komatsu HPV90 and HPV95 main pump family, fitted on the roughly 20-tonne Komatsu PC200 excavator. Send the machine model and pump serial so we confirm the exact pump version before quoting.
How do I know the port plate is worn?
When the face is scored, pitted or worn around the kidney ports, internal leakage rises: the pump feels weak, the boom slows, power drops under load and oil heats quickly. Replace the port plate and inspect the mating cylinder block face together.
How do I pick the right HPV90 port plate for my pump?
Send the machine model, the serial number stamped on the pump housing and a clear photo of the old plate. Port layout and thickness vary between pumps in the HPV family, so Việt Trung Hải checks the numbers before shipping. Genuine or JIC, the plate goes out to that same HPV90 code and fits straight in.
Get a quote
Request a quote: Retainer plate – Komatsu HPV90
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV90 (rear)HPV90On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV90 (front)HPV90On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV90HPV90On requestView · get a quoteTechnical handbook