Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Komatsu HPV90

Komatsu · HPV

Valve plate – Komatsu HPV90

New, correct codeOn requestHPV90

Quick answer

The Komatsu HPV90 valve plate is the porting plate that times high- and low-pressure flow against the cylinder block, used in the HPV main pump on Komatsu PC200-class excavators around 20 tonnes.

Việt Trung Hải stocks genuine and JIC plates, both on code and ready to run in the original pump, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Komatsu · HPV
Model code
HPV90
Condition
New, correct code
Availability
On request

What the HPV90 valve plate fits

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The Komatsu HPV90 valve plate serves the HPV main hydraulic pump fitted to the Komatsu PC200-class excavator, around 20 tonnes. Its lapped face and kidney ports must seal against the block to hold pressure.

Signs it needs replacing

Look for scoring, pitting or flaked bronze on the sliding face, grey scuff marks from oil starvation, weak pump output, slow cylinders under load, internal leakage and fast-heating oil. As the plate wears, high-pressure oil bleeds to the low side and damage spreads to the block and pistons.

Choosing quality parts

A good valve plate needs a wear-resistant base and bronze layer, flat machining and a fine surface finish for a tight seal. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC HPV90 plate is cut to the correct code, thickness and kidney-port position, so it seats on the original cylinder block and seals with no re-lapping. Komatsu genuine plates are on the shelf too. Send your pump code for a fast quote.

Frequently asked questions

Which excavator does the HPV90 valve plate fit?

The Komatsu HPV90 valve plate fits the HPV main hydraulic pump on Komatsu PC200-class excavators, around 20 tonnes. Send your pump code and machine model so we can confirm the exact part before quoting.

How do I know the valve plate is worn?

Weak pump output, slow cylinders, fast-heating oil or a noisy pump usually point to it. On teardown you often see scoring, pitting, flaked bronze or scuff marks. Replace the valve plate together with the pump internals to restore performance.

Does a JIC plate need re-lapping when it goes into a standard HPV90?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC HPV90 plate is machined to the correct code and interchange tolerances, so it goes straight onto the original block. Genuine plates are stocked as well. Send your pump code for a fast quote.

Get a quote

Request a quote: Valve plate – Komatsu HPV90

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides