
Front drive shaft – Komatsu HPV90
Quick answer
The Komatsu HPV90 front drive shaft is the input shaft that takes drive from the engine and carries torque into the cylinder block to turn the HPV90 main pump on Komatsu PC200-class excavators around 20 tonnes.
Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine and JIC shafts to the correct code, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV90
- Condition
- New, correct code
- Availability
- On request
What the HPV90 front shaft fits
The front (input) drive shaft takes drive straight from the engine and carries torque into the cylinder block to turn the pump's rotary group. Unlike the rear shaft, which couples to the second unit in a tandem pump, this front shaft sits at the pump's input end. It serves the Komatsu HPV90 main pump — the axial-piston pump used on Komatsu PC200-class excavators around 20 tonnes. Match the front position and spline count when ordering.
When to replace
Watch for worn or loose splines, a rattle or vibration under load, scoring at the seal journal that leaks oil, or a bent shaft that makes the pump run hot and lose power. Replace early to avoid damage spreading to the block and pistons.
Choosing quality
Shaft steel, spline accuracy and heat treatment set service life. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks HPV90 front shafts genuine and JIC to the same code — the JIC shaft runs concentric in the original housing with no fitting work. Contact us for a fast quote.
Frequently asked questions
How does the HPV90 front shaft differ from the rear shaft?
The front shaft is the input shaft that takes drive straight from the engine, while the rear shaft couples to the second unit in a tandem pump. They differ in position and spline count, so order the exact one.
Which excavator uses the HPV90 pump?
The Komatsu HPV90 main pump is an axial-piston pump fitted to Komatsu PC200-class excavators around 20 tonnes. This front shaft drives that pump unit, so choose the correct position and spline count.
How do I know the front shaft needs replacing?
Look for worn, loose splines, rattling or vibration under load, oil leaking at the seal journal from a scored shaft, or the pump losing power. Replace it early to avoid damage to the block and pistons.
Get a quote
Request a quote: Front drive shaft – Komatsu HPV90
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV90 (rear)HPV90On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV90 (front)HPV90On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV90HPV90On requestView · get a quoteTechnical handbook