
Shoe plate – Komatsu HPV90 (rear)
Quick answer
The HPV90 rear shoe plate holds the piston shoes flat against the swash plate in the rear section of Komatsu's tandem HPV90 main pump (PC200-class, ~20 t), keeping them seated and evenly loaded.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Shoe plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV90
- Condition
- New, correct code
- Availability
- On request
Which pump the HPV90 rear shoe plate fits
The rear shoe plate is the retainer for the rear section of Komatsu's tandem HPV90 main pump. As the cylinder block turns, it presses the piston shoes flat against the swash plate, keeping the shoes seated and evenly loaded through each stroke. HPV90 is the axial-piston pump on 20-tonne excavators, typically the Komatsu PC200. It is the shoe retainer, separate from the swash plate.
Signs of trouble
A worn, cracked or slackened rear plate lets the shoes tilt and lift off the swash plate and lose their seal. The pump struggles to build pressure, flow drops, the machine feels tired under load, and you hear knocking with metal in the oil. Debris under the shoes can wreck the whole piston group.
Choosing the right part
Because it carries load and slides constantly, the plate needs hardened steel, a flat face and even hold-down. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC HPV90 rear plate is cut to the code and to interchange tolerances, so it drops into the original housing and the job is done, while genuine Komatsu plates stay in stock. Send your pump code for a fast quote.
Frequently asked questions
What does the HPV90 rear shoe plate do?
It presses and holds the piston shoes flat against the swash plate in the rear pump section so they do not lift and stay evenly loaded.
What are the signs of a failing HPV90 shoe plate?
The pump struggles to build pressure, flow drops, the machine feels tired under load, with knocking and metal in the oil.
Does the JIC HPV90 rear plate need lapping before it goes in?
No. The face and the shoe pockets are finished to spec — fit it to the original housing and run it.
Get a quote
Request a quote: Shoe plate – Komatsu HPV90 (rear)
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV90 (front)HPV90On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV90HPV90On requestView · get a quoteTechnical handbook