
Kawasaki · NV
Retainer plate – Kawasaki NV84DT
Quick answer
The NV84DT port plate is the oil-distribution face inside a Kawasaki NV-series axial piston pump, where the rotating cylinder block seals against it to split flow between suction and discharge. It fits NV main pumps on older small-to-mid excavators.
Việt Trung Hải carries genuine plates and JIC plates, all cut to the original number and sealing from the first fit.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Kawasaki · NV
- Model code
- NV84DT
- SKU
- 2021-590-1-97
- Condition
- New, correct code
- Availability
- On request
Which pump the Kawasaki NV84DT port plate fits
The NV84DT port plate is the oil-distribution face inside a Kawasaki NV-series axial piston pump. The rotating cylinder block presses against it, and its kidney ports time the flow between suction and discharge on every revolution. It is a high-pressure sealing surface that governs the pump's output. The NV84DT belongs to the NV main-pump family fitted on older small-to-mid excavators, so a correct-code plate keeps clearance and flatness matched to the cylinder block.
When to replace
A worn, scored or pitted port plate lets the pump bleed internally: weak breakout, slow boom and bucket, power loss under load, fast oil heating and noise. Burn marks or grooves on the face mean it is time to replace, usually together with the ball guide and shoes.
Choosing quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC NV84DT port plate is lapped flat and surface-hardened to the original code, so it seats in the standard pump body with no extra work. Genuine Kawasaki plates are stocked too. Contact VTH for a fast quote and fitment advice.
Frequently asked questions
Which pump does the NV84DT port plate fit?
NV84DT is the port plate for Kawasaki NV-series axial piston pumps used on older small-to-mid excavators. Send your pump code and a photo of the assembly so Việt Trung Hải can confirm the exact version and quote.
Should I replace the port plate together with the ball guide and shoes?
Yes. When the port plate is worn or scored, the ball guide and piston shoes are usually worn too. Replacing the set together restores matched sealing surfaces and full flow, and avoids opening the pump twice.
Does the JIC plate need lapping before it goes in?
No. The JIC NV84DT plate is lapped flat and surface-hardened to the original code, so it fits the standard pump body as it comes. Check that the cylinder-block face is still true, then reassemble. Contact us for a fast quote.
Get a quote
Request a quote: Retainer plate – Kawasaki NV84DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVRotary group kit – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVSwash plate – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVValve plate – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVPiston – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVCylinder block – Kawasaki NV84DTNV84DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV111DTNV111DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV137NV137On requestView · get a quoteTechnical handbook