Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Kawasaki NV137

Kawasaki · NV

Rotary group kit – Kawasaki NV137

New, correct codeOn requestNV137

Quick answer

The Kawasaki NV137 rotary group is the rotating assembly — cylinder block, pistons, valve plate and drive shaft — that generates a piston pump's flow and pressure. It fits Kawasaki NV-series main pumps on medium-class excavators.

Việt Trung Hải supplies genuine Kawasaki and JIC groups to the correct code, fitting the original housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · NV
Model code
NV137
SKU
2021-79402
Condition
New, correct code
Availability
On request

What the Kawasaki NV137 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, piston shoes, valve plate and drive shaft — where the pump's flow and pressure are actually made. The NV137 group fits Kawasaki NV-series main pumps used on medium-class excavators. Fitting a complete group restores flow and pressure without replacing the whole pump.

When to replace

Watch for a weak pump, slow or sluggish movements under load, unusual growl or vibration at the pump, rapid oil heating, or bronze and metal particles in the oil — signs the cylinder block face, valve plate and shoes are scored and worn.

Choosing quality parts

Flat, hard, well-finished mating faces are what let the pump hold pressure and last. Việt Trung Hải supplies NV137 rotary groups in genuine Kawasaki and in JIC Hydraulics — material, heat treatment and flatness held to the code, so the group runs at pressure straight in the original housing. Send your pump code for a fast quote.

Frequently asked questions

Which machine does the Kawasaki NV137 rotary group fit?

The NV137 group fits Kawasaki NV-series main pumps used on medium-class excavators. Send the code stamped on the pump body or a photo of the group, and Việt Trung Hải will confirm the exact match before quoting.

Should I replace the whole rotary group or just single parts?

Replace the whole group. The cylinder block, pistons, shoes and valve plate wear as matched, mating parts, so a complete rotary group holds pressure far more reliably and lasts longer than swapping a few worn pieces.

Does a JIC NV137 group need the valve plate re-lapped?

No. The JIC Hydraulics parts Việt Trung Hải distributes are made to the NV137 code, with the valve plate and block face flat and hard to spec. They seal in the original housing and hold pressure from the first run.

Get a quote

Request a quote: Rotary group kit – Kawasaki NV137

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides