
Kawasaki · NV
Drive shaft – Kawasaki NV270
Quick answer
The Kawasaki NV270 drive shaft transmits engine torque into the cylinder block of the Kawasaki NV-series main pump used on larger excavators.
Việt Trung Hải handles genuine and JIC shafts, cut to the NV270 code and sized to seat in the original block, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · NV
- Model code
- NV270
- SKU
- 2021-590-1-10
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki NV270 drive shaft fits
The drive shaft transmits torque from the engine into the cylinder block to rotate the pump's rotary group. This is the drive shaft for the Kawasaki NV270 axial-piston main pump, part of the NV series used on larger excavators. Its splines carry the full drive torque, so concentricity and spline strength set the life of the whole pump.
When to replace
Watch for worn splines and backlash, knocking under load, a scored seal journal that leaks oil, or a cracked or twisted shaft after overload. Any of these calls for inspection before damage spreads to the cylinder block and swash plate.
Choosing quality parts
Material and heat treatment matter: alloy steel, case-hardened splines, machined to correct tolerance and concentricity. Việt Trung Hải, an authorized JIC Hydraulics distributor, handles the NV270 drive shaft in genuine and JIC form — the JIC shaft is cut to the NV270 code and holds the working clearance in the original block and housing. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the Kawasaki NV270 drive shaft fit?
It is the drive shaft for the Kawasaki NV270 axial-piston main pump in the NV series fitted to larger excavators. The splines mesh with the pump input and carry the full engine torque. Việt Trung Hải quotes quickly by exact part.
How do I know the drive shaft is worn and needs replacing?
Common signs are spline backlash with vibration and knocking under load, a scored seal journal that leaks oil, or a cracked or twisted shaft after overload. Replace early to avoid damage spreading to the cylinder block and swash plate.
How is a JIC shaft different from no-name parts?
JIC drive shafts use alloy steel with case-hardened splines, machined to correct tolerance and high concentricity, so they handle torque and fatigue better than no-name parts. Việt Trung Hải is an authorized JIC Hydraulics distributor supplying the correct part.
Get a quote
Request a quote: Drive shaft – Kawasaki NV270
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVRotary group kit – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVSwash plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVRetainer plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVValve plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVPiston – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVCylinder block – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV111DTNV111DTOn requestView · get a quoteTechnical handbook