
Kawasaki · NV
Valve plate – Kawasaki NV270
Quick answer
The Kawasaki NV270 valve plate is the porting plate against the cylinder block that times each piston's intake and discharge in NV-series main piston pumps.
Việt Trung Hải supplies the NV270 as a genuine part and as a JIC part to code, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · NV
- Model code
- NV270
- SKU
- 2021-590-1-155
- Condition
- New, correct code
- Availability
- On request
The Kawasaki NV270 valve plate is the porting plate pressed against the cylinder block. It times each piston's intake and discharge, keeping the pump's flow and pressure steady.
Which pump the NV270 fits
The NV270 is used in Kawasaki NV-series main piston pumps. It sits between the cylinder block and the pump cover, held tight by oil pressure and spring force. Match the exact NV270 code so the kidney ports and bore line up with the original block.
Signs it needs replacing
A worn valve plate shows scoring, wear grooves, or cavitation pitting on its sealing face. Expect internal leakage, pressure loss, weak lifting, fast-heating oil, and metal debris. Burn discoloration means the face has overheated.
Choosing quality parts
Việt Trung Hải supplies the NV270 as a genuine part and as a JIC Hydraulics part — lapped flat, surface-treated and held to the tolerance the standard block calls for, so it seals from the first run. As an authorized JIC distributor we know exactly where each plate comes from. Contact VTH for a fast quote.
Frequently asked questions
Which pump does the NV270 valve plate fit?
The NV270 is the valve plate for Kawasaki NV-series main piston pumps. It sits between the cylinder block and pump cover to route high- and low-pressure oil. Choose the exact NV270 code so the ports and orientation match the original block.
When should I replace the valve plate?
Replace it when the sealing face shows scoring, wear grooves, cavitation pitting, or burn discoloration. These cause internal leakage, pressure loss, and weak lifting. A new valve plate restores the seal and flow the pump needs to work correctly.
Can a lightly scored NV270 plate be lapped instead of changed?
If the bronze layer still has depth, a shop can lap it. Once the steel backing shows or the scoring has cut grooves, lapping buys only a short reprieve before the pressure drops again. A correct-code NV270 plate ends it — Việt Trung Hải holds genuine and JIC stock as an authorized distributor.
Get a quote
Request a quote: Valve plate – Kawasaki NV270
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVRotary group kit – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVDrive shaft – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVSwash plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVRetainer plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVPiston – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVCylinder block – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV111DTNV111DTOn requestView · get a quoteTechnical handbook