
Kawasaki · NV
Cylinder block – Kawasaki NV270
Quick answer
The Kawasaki NV270 cylinder block is the barrel holding the piston bores that rotate around the drive shaft, used in the main pump of the NV series on larger excavators and cranes.
Việt Trung Hải supplies genuine and JIC blocks to the correct code and working clearance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · NV
- Model code
- NV270
- SKU
- 2021-590-1-263
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki NV270 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to draw and push oil. The NV270 belongs to Kawasaki's NV axial-piston pump series, sitting in the main pump of larger excavators and cranes that run this family. Bore accuracy and the port face that mates with the valve plate govern how well the pump builds pressure and flow.
Signs it needs replacing
A scored valve-plate face and worn bores raise internal leakage: weak pressure, slow boom and arm, the machine bogging under heavy load or when the oil is hot, plus fast oil heating, a whining pump and metal debris. Replace early to protect the pistons, valve plate and drive shaft.
Choosing quality
Việt Trung Hải is an authorized JIC Hydraulics distributor, supplying genuine and JIC NV270 cylinder blocks to the same code. Alloy steel, heat treatment and bores and valve face machined to the right clearance keep pressure up over long hours, and the JIC block reaches that clearance in the original housing without lapping. Contact us for advice and a fast quote.
Frequently asked questions
Which pump and machine does the NV270 cylinder block fit?
The NV270 is a block for Kawasaki's NV axial-piston pump series, used in the main pump of larger excavators and cranes running this family. Send your machine number and current pump code and Việt Trung Hải will confirm the fit and quote fast.
How do I know the cylinder block is worn and needs replacing?
Common signs are weak pressure, slow boom and arm, the machine bogging under load or when the oil is hot, fast oil heating and metal debris. As the port face and bores wear, internal leakage rises, so inspect and replace early.
Does the JIC NV270 block reach the correct clearance in a stock housing?
Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies NV270 blocks machined to the same code, with bores and valve face at the right clearance for the original housing. Genuine blocks are on hand as well; contact us for advice and a fast quote.
Get a quote
Request a quote: Cylinder block – Kawasaki NV270
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVRotary group kit – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVDrive shaft – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVSwash plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVRetainer plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVValve plate – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVPiston – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NV270NV270On requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV111DTNV111DTOn requestView · get a quoteTechnical handbook