Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Kawasaki NV64DT

Kawasaki · NV

Rotary group kit – Kawasaki NV64DT

New, correct codeOn requestNV64DT

Quick answer

The Kawasaki NV64DT rotary group is the rotating assembly (cylinder block, pistons, valve plate, drive shaft) that generates flow and pressure in the NV-series axial piston pump used as the main pump on older-generation excavators. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC NV64DT group built to code and to the original fits, so it drops into the standard housing. Fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · NV
Model code
NV64DT
SKU
2021-21340
Condition
New, correct code
Availability
On request

What the Kawasaki NV64DT rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the pump's flow and pressure. The NV64DT code fits Kawasaki's NV-series axial piston pump, the main pump on older-generation excavators. Replacing the group as a set keeps the sliding faces matched, so the pump runs smoother and holds pressure.

When to replace it

Worn rotary groups show up as lost power: slow boom lift, weak swing, sluggish travel, worst once the oil is hot. Expect pump groan or whine, vibration, and oil that overheats. In severe cases the block and valve plate score and metal appears in the oil.

Choosing quality parts

Rotary-group life comes down to the material and machining precision of the block, pistons and plates. Việt Trung Hải is an authorized JIC Hydraulics distributor: JIC builds the NV64DT group to the same code and the same fits, so it goes into the original pump housing as it comes — no reaming, no lapping. Fast quote on request.

Frequently asked questions

Which pump and machine does the NV64DT rotary group fit?

The NV64DT rotary group fits Kawasaki's NV-series axial piston pump, the main pump on older-generation excavators. Send Việt Trung Hải your pump code and machine model and our team will confirm the exact configuration before quoting.

Should I replace the whole rotary group or just worn parts?

Replacing the full group keeps the block, pistons, valve plate and swash plate matched for clearance and wear, so the pump holds pressure and lasts longer than piecemeal fixes. If the pump is badly scored or has metal in the oil, replace the set.

Does a JIC rotary group need any machining to go into the NV64DT housing?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC NV64DT group is made to the correct code and to the original fits, so the old set comes out and the new one goes in — no reaming, lapping or shaft grinding. Contact VTH for advice and a fast quote.

Get a quote

Request a quote: Rotary group kit – Kawasaki NV64DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides