Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Kawasaki NV64DT

Kawasaki · NV

Washer – Kawasaki NV64DT

New, correct codeOn requestNV64DT

Quick answer

The Kawasaki NV64DT washer is a rotary-group part that sets axial position and clearance for the rotating assembly in Kawasaki NV-series main piston pumps on hydraulic excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the NV64DT washer and full rotary-group sets with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · NV
Model code
NV64DT
SKU
2021-590-1-233
Condition
New, correct code
Availability
On request

What the NV64DT washer fits

The NV64DT washer sits in the pump's rotary group — the rotating assembly of cylinder block, pistons, valve plate, swash plate and drive shaft. It holds axial position and clearance for the group, keeping correct contact between the cylinder block and valve plate so the pump makes full flow and pressure. It is a rotary-group spare for Kawasaki NV-series main piston pumps on hydraulic excavators.

When to replace

A worn-thin or deformed washer lets the rotary group lose its clearance: weak pump, pressure loss, slow and sluggish movements under load, abnormal pump noise, internal leakage and fast-heating oil. Replace it with the rest of the rotary group during a pump overhaul.

Choosing quality parts

Use the correct NV64DT code, size and material to hold the designed clearance. Việt Trung Hải is an authorized JIC Hydraulics distributor: JIC washers are made to code and to interchange tolerance, so a fitter drops them into the original Kawasaki rotary group with nothing to adjust. We stock single washers, complete NV64DT rotary-group sets and genuine parts — fast quote by exact code.

Frequently asked questions

Which pump does the NV64DT washer fit?

It is a rotary-group part for Kawasaki NV-series main piston pumps used on hydraulic excavators. The washer holds clearance and contact pressure for the rotating assembly; when replacing it, also check the cylinder block, pistons and valve plate.

When should the rotary-group washer be replaced?

Replace it when the pump is weak, loses pressure, moves slowly under load, makes abnormal noise or leaks internally. During a pump overhaul, if the washer is worn thin or deformed, fit a new one to restore correct clearance.

Does Việt Trung Hải sell the NV64DT washer separately?

Yes. We supply the NV64DT washer on its own or as a full rotary-group set, from JIC and genuine alike. The JIC washer is made to interchange tolerance, so it seats in the original pump at the right clearance. Send your pump code and machine model for a fast quote and part confirmation.

Get a quote

Request a quote: Washer – Kawasaki NV64DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides