Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki NV64DT

Kawasaki · NV

Cylinder block – Kawasaki NV64DT

New, correct codeOn requestNV64DT

Quick answer

The Kawasaki NV64DT cylinder block is the piston-bore barrel inside the NV-series axial-piston main pump used on compact-to-mid excavators. It carries heavy wear and sets the pump's flow and pressure.

Việt Trung Hải supplies JIC and genuine blocks to the same code that fit the original housing directly, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · NV
Model code
NV64DT
SKU
2021-590-1-264
Condition
New, correct code
Availability
On request

The NV64DT cylinder block is the rotating barrel that holds the piston bores in the pump; the pistons reciprocate inside them to draw and deliver oil. It belongs to Kawasaki's NV-series axial-piston main pump, fitted on compact-to-mid excavators. As the highest-loaded wear part in the pump, it governs output flow and pressure.

Replace it when the valve-plate face is scored, pitted or discolored, when the piston bores wear open and internal leakage rises, or when the machine grows slow and weak, oil overheats, and the pump gets noisy. Once bores pass their limit, reboring is rarely economical — a new block with matched pistons lasts longer.

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies Kawasaki NV64DT blocks in JIC form alongside genuine ones: JIC cuts them to the same code and fitting tolerance, so the block seals in the original pump housing with no reboring. Contact us for a fast quote and help matching the code.

Frequently asked questions

Which pump and machine does the Kawasaki NV64DT block fit?

NV64DT is the cylinder block for Kawasaki's NV-series axial-piston main pump, fitted on compact-to-mid excavators. Send your pump code and machine model so Việt Trung Hải can confirm the exact part before quoting.

When should I replace the block instead of reboring?

If the valve-plate face is deeply scored, the piston bores are worn open and leaking internally, and the machine is weak and losing pressure, reboring rarely lasts. A new block with matched pistons restores steadier efficiency.

Does the JIC NV64DT block require any machining of the pump?

No. Round bores, a true valve face and mounting dimensions to the original code mean the housing stays untouched — put it back together and go. Việt Trung Hải distributes JIC Hydraulics under authorization and carries genuine Kawasaki blocks.

Get a quote

Request a quote: Cylinder block – Kawasaki NV64DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides