Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Retainer plate – Rexroth-Uchida AP2D25

Uchida/Rexroth · AP2D

Retainer plate – Rexroth-Uchida AP2D25

New, correct codeOn requestAP2D25

Quick answer

The Rexroth-Uchida AP2D25 port plate is the oil-distribution face of the AP2D main pump used on mini and compact excavators, splitting flow between the suction and pressure sides as the cylinder block turns.

Việt Trung Hải supplies the correct part — genuine Uchida and JIC Hydraulics, polished to fit tolerance — with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Uchida/Rexroth · AP2D
Model code
AP2D25
Condition
New, correct code
Availability
On request

What the AP2D25 port plate fits

The port plate is the fixed distribution face the piston pump's cylinder block rotates against; through its kidney ports it splits oil between the suction and pressure sides. With the ball guide, it holds the piston shoes at the right angle against the swash plate. The AP2D25 belongs to the Rexroth-Uchida AP2D main-pump series used on mini and compact excavators.

When to replace

Scoring, pitting, or worn port lands cause internal leakage, pressure loss, and weak lifting or swing. A surface no longer flat and polished lets oil slip through the clearance, builds heat, and makes the pump noisy. It is usually replaced as a set at pump overhaul.

Choosing quality parts

A good port plate is flat, highly polished, and wear-resistant. Việt Trung Hải supplies the correct AP2D25 port plate — genuine Uchida and JIC Hydraulics, which we distribute under authorization. The JIC face arrives polished to fit tolerance, so it goes on as it comes with no extra finishing. Contact us for a fast quote.

Frequently asked questions

Which machines use the AP2D25 port plate?

The AP2D25 port plate belongs to the Rexroth-Uchida AP2D main-pump series fitted on mini and compact excavators. Send us your pump code and machine model so we can match the exact part and quote quickly.

How do I know the port plate is worn?

Scoring, pitting, or a loss of flatness on the port plate causes internal leakage, pressure drop, weak lifting or swing, and a noisier pump. Replace it as a set during pump overhaul to restore a proper seal.

Does a new AP2D25 plate need polishing before it goes in?

No. The JIC AP2D25 plate from Việt Trung Hải is already ground and polished to fit tolerance, so it lands at the correct clearance in the standard housing. Before fitting, just wash it off, check the block face for deep scoring and put it back together.

Get a quote

Request a quote: Retainer plate – Rexroth-Uchida AP2D25

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides