
Uchida/Rexroth · AP2D
Valve plate – Uchida AP2D25
Quick answer
The AP2D25 valve plate is the high/low-pressure porting plate for the Rexroth-Uchida AP2D main pump used on mini excavators, timing each piston's intake and discharge.
Việt Trung Hải, an authorized JIC distributor, supplies the AP2D25 in JIC and genuine form, each on the correct code, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · AP2D
- Model code
- AP2D25
- Condition
- New, correct code
- Availability
- On request
What the AP2D25 valve plate does
The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. This part fits the Rexroth-Uchida AP2D main pump family used on mini and compact excavators. Its kidney ports and mating face must stay flat and finely finished for the pump to build steady pressure and flow.
When to replace
Watch for scoring, pitting, discoloration or burn marks from lost lubrication; a weak pump that loses power under load; or fast oil heating, noise and vibration from internal leakage across a worn face. Replace with the correct AP2D25 before damage spreads to the block and pistons.
Choosing quality parts
Material, heat treatment and machined flatness decide internal sealing. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC AP2D25 plate is heat-treated and lapped to the figures that belong to that code, so it seals against the block in a standard AP2D pump on the first fit. Genuine plates run alongside it. Contact us for a fast quote.
Frequently asked questions
Which excavators use the AP2D25 valve plate?
The AP2D25 valve plate fits the Rexroth-Uchida AP2D main pump family found on mini and compact excavators. Việt Trung Hải supplies the correct AP2D25 and can confirm the fit against your actual pump model.
How do I know the valve plate is worn?
Signs include a weak pump, pressure loss, slow lifting under load, fast oil heating, or a face that is scored, pitted or burnt. Left too long, the worn clearance causes internal leakage and damage to the block and pistons.
Do I need to lap the block face when fitting a JIC AP2D25 plate?
No. The JIC plate is made on the correct code and to original fit tolerances, so it beds evenly in a standard housing. All you do is clean the block face, check it is still flat, and set the locating pin the right way round. Việt Trung Hải is an authorized JIC distributor, shipping the correct code with fast quotes.
Get a quote
Request a quote: Valve plate – Uchida AP2D25
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · AP2DRotary group kit – Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DPiston pump – Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DShoe plate – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DRetainer plate – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DPin – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DPiston – Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DBall guide – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DCylinder block – Uchida AP2D25AP2D25On requestView · get a quoteTechnical handbook