
Uchida/Rexroth · AP2D
Piston pump – Uchida AP2D25
Quick answer
The AP2D25 is a main axial-piston pump in Uchida's (Rexroth/Uchida) AP2D family, used on mini excavators.
Việt Trung Hải supplies AP2D25 pumps and rotary groups in genuine and JIC form, each to the correct code and fitting tolerance, with fast quotation.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston pump
- Brand / pump line
- Uchida/Rexroth · AP2D
- Model code
- AP2D25
- Condition
- New, correct code
- Availability
- On request
AP2D25 pump: what it fits
The AP2D25 is a main axial-piston pump from Uchida (Rexroth/Uchida), part of the AP2D family. This variable-displacement swash-plate pump turns engine power into high-pressure flow that drives the boom, arm, bucket, swing and travel. The AP2D series powers mini excavators, where a compact pump still has to feed several movements at once.
Signs it needs replacing
Weak power, slow boom lift and swing, loss of digging force, fast oil heating, whining or knocking, and vibration point to worn piston shoes, valve plate and cylinder block, with internal leakage and pressure loss.
Choosing quality parts
As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies AP2D25 pumps and rotary groups in genuine and JIC form — correct code, fitting tolerance held, so a JIC group goes straight into the standard pump housing. Contact us for fast quotation.
Frequently asked questions
Which excavator uses the AP2D25 pump?
The AP2D25 is a main AP2D-family piston pump from Uchida (Rexroth/Uchida), fitted to mini excavators. It feeds the boom, arm, bucket, swing and travel. Send us your machine model so we can match the correct version.
Do you sell the AP2D25 rotary group separately?
Yes. Việt Trung Hải offers the complete AP2D25 pump and the rotary group on its own (cylinder block, pistons, shoes, valve plate). If the housing is sound, a JIC group to the correct code drops into it and restores flow and pressure.
Does an AP2D25 rotary group need the pressure reset afterwards?
The regulator and relief valve keep their existing settings, so normally nothing needs resetting. After fitting a JIC group to the AP2D25 code, bleed the air, run it unloaded until the oil warms, then read working pressure; if it is off, inspect the regulator rather than turning the adjuster blind.
Get a quote
Request a quote: Piston pump – Uchida AP2D25
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · AP2DRotary group kit – Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DShoe plate – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DRetainer plate – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DValve plate – Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DPin – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DPiston – Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DBall guide – Rexroth-Uchida AP2D25AP2D25On requestView · get a quote
Uchida/Rexroth · AP2DCylinder block – Uchida AP2D25AP2D25On requestView · get a quoteTechnical handbook