
Retainer plate – Kawasaki K3V280DT
Quick answer
The Kawasaki K3V280DT port plate distributes oil inside the main piston pump, routing it through the suction and discharge ports and separating the low- and high-pressure sides. The K3V280 powers large excavators of around 50 tonnes and up.
Việt Trung Hải supplies the correct K3V280DT part with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Kawasaki · K3V
- Model code
- K3V280DT
- SKU
- 2021-590-1-76
- Condition
- New, correct code
- Availability
- On request
What the K3V280DT port plate does
The port plate is the oil-distribution element inside Kawasaki's K3V280DT piston pump. It seals against the rotating cylinder block, routing oil through the suction and discharge ports on each stroke while keeping the low- and high-pressure sides apart. The K3V280 is the main pump on large excavators of roughly 50 tonnes and up, where high flow and pressure load the sealing face constantly.
When to replace it
Deep scoring, cavitation pitting, grooving or a face that has lost flatness all cause internal leakage, weak pump output, slow cylinders and hot oil. Inspect the port plate together with the ball guide and shoes at overhaul.
Choosing quality parts
A correct K3V280DT port plate needs hardened material, a flat lapped face and proper surface finish to stay sealed; at this pump size a small error in the face shows up as lost pressure straight away. The JIC plate is made to code and to interchange tolerance, working at the right clearance in the original pump from the start. Việt Trung Hải distributes JIC Hydraulics under authorization and carries genuine plates as well. Fast quote by pump number.
Frequently asked questions
Which excavators use the K3V280DT port plate?
The K3V280 is the main pump on large crawler excavators of roughly 50 tonnes and up. The K3V280DT port plate replaces a worn or scored plate in that pump. Send your pump number so we confirm the exact version.
How do I know the port plate is worn?
Common signs are weak pump output, slow cylinders, hot oil and rising internal leakage. If the face shows deep scoring, cavitation pitting or lost flatness on inspection, replace it, and check the ball guide and shoes at the same time.
Does the JIC K3V280DT plate need reaming or reworking to fit?
No. JIC machines it to the K3V280DT code and to interchange tolerance, so the plate seals in the original pump and works at the right clearance. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries genuine plates as well — contact us for a fast quote and a stock check.
Get a quote
Request a quote: Retainer plate – Kawasaki K3V280DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VRotary group kit – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VSwash plate – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VShoe plate – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VSpring – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VValve plate – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VPiston – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VBall guide – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VWasher – Kawasaki K3V280DTK3V280DTOn requestView · get a quoteTechnical handbook