Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Kawasaki K3V280DT

Kawasaki · K3V

Washer – Kawasaki K3V280DT

New, correct codeOn requestK3V280DT

Quick answer

The K3V280DT washer is a spacer-and-locating part in the rotary group of the Kawasaki K3V280 main pump — a large axial-piston pump used on excavators around 50 tonnes and up.

Việt Trung Hải supplies genuine and JIC washers to the correct code as JIC Hydraulics' authorized distributor, with a fast quote by pump code.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V280DT
SKU
2021-590-1-225
Condition
New, correct code
Availability
On request

A washer (vòng đệm) is a spacer-and-locating part inside the rotary group of the Kawasaki K3V280DT main pump — the rotating assembly of cylinder block, pistons, valve plate, swash plate and drive shaft that produces the pump's flow and pressure. It holds steady clearance and preload between the rotating parts.

Which pump and machine it fits

K3V280 is a large axial-piston main pump, typically fitted to excavators around 50 tonnes and up. The K3V280DT washer belongs to this pump's rotary group and should be replaced together with the group during overhaul.

Wear signs and choosing quality

Worn, hardened or deformed washers let the rotary group develop axial play, internal leakage, weak output and slow pressure build — often alongside valve-plate wear and scored pistons. Việt Trung Hải supplies K3V280DT washers in genuine form and as JIC Hydraulics parts — we are JIC's authorized distributor — with the correct part code, material and machining for a large-frame pump, so the washer sets the right preload in the original group with nothing to grind. Fast quote on request.

Frequently asked questions

Which excavator does the K3V280DT washer fit?

The K3V280DT belongs to the Kawasaki K3V280 main pump, a large axial-piston unit typically used on excavators of about 50 tonnes and up. Send the pump code or machine serial and Việt Trung Hải will confirm the exact part before quoting.

When should the K3V280DT rotary-group washer be replaced?

Replace it once the washer is worn, hardened or deformed, causing axial play, internal leakage and slow pressure build in the pump. Because such damage usually spreads to the valve plate and pistons, inspect and renew the whole rotary group together.

Should the K3V280DT washer be changed on its own or with the whole group?

If only the washer is hardened and lightly worn, a correct-code washer on its own is enough. Once the valve face is worn and the pistons are scored, change it with the group so preload stays even. As JIC Hydraulics' authorized distributor, Việt Trung Hải stocks genuine and JIC K3V280DT washers to code.

Get a quote

Request a quote: Washer – Kawasaki K3V280DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides