Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Spring – Kawasaki K3V280DT

Kawasaki · K3V

Spring – Kawasaki K3V280DT

New, correct codeOn requestK3V280DT

Quick answer

The K3V280DT spring is the elastic element inside the Kawasaki piston-pump rotary group, holding the cylinder block against the valve plate and the shoes against the swash plate for sealing at start-up. It fits the main pump on large excavators around 50 tonnes and up.

Việt Trung Hải supplies genuine Kawasaki and JIC springs to the correct spec, seating in the standard block as they come, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V280DT
SKU
2021-590-1-125
Condition
New, correct code
Availability
On request

What the K3V280DT spring fits

The spring is the elastic element inside the rotary group of the Kawasaki K3V280DT piston pump. The center spring holds the cylinder block against the valve plate and presses the shoe retainer onto the swash plate, keeping the pump sealed and the shoes in contact at start-up before oil pressure builds. K3V280DT is the main pump on large excavators of roughly 50 tonnes and up.

Signs of wear

A weak or broken spring shows cold: slow pressure build, low power on start-up, stronger as the pump warms. Poor block seating brings internal leakage, flow loss and fast valve-plate wear, sometimes knocking. A pulled spring often measures short or cracked.

Choosing quality

The spring must hold its load across countless cycles at high temperature and pressure, so steel grade, heat treatment and finish decide its life. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries K3V280DT springs from Kawasaki and from JIC, wound to the same length and load, so they seat in the original block untouched. Fast quote.

Frequently asked questions

Which machines does the K3V280DT spring fit?

K3V280DT is a Kawasaki main pump used on large excavators of roughly 50 tonnes and up. The spring sits inside the rotary group, holding the cylinder block against the valve plate. Send your machine and pump code and Việt Trung Hải will confirm the right spring and quote fast.

How do I know the pump spring is weak?

Common signs are low power and slow pressure build on a cold start-up that improve as the pump warms, along with internal leakage and flow loss. On teardown, a spring that has lost tension, shortened or cracked should be replaced.

Does a JIC K3V280DT spring need its preload set on assembly?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC spring uses the correct steel grade and heat treatment and is wound to the K3V280DT free length and load, so it is at full preload once fitted — nothing to shim or grind. Genuine Kawasaki springs remain available on request.

Get a quote

Request a quote: Spring – Kawasaki K3V280DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides