Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston – Kawasaki K3V280DT

Kawasaki · K3V

Piston – Kawasaki K3V280DT

New, correct codeOn requestK3V280DT

Quick answer

The K3V280DT piston is the plunger inside the cylinder block that generates flow and pressure for the Kawasaki K3V main pump on large excavators of about 50 tonnes and up.

Việt Trung Hải supplies genuine Kawasaki and JIC pistons to the correct K3V280DT code, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston
Brand / pump line
Kawasaki · K3V
Model code
K3V280DT
SKU
2021-590-1-170
Condition
New, correct code
Availability
On request

Piston for the K3V280DT pump

The piston is the plunger that reciprocates inside the cylinder-block bore; its shoe rides on the swash plate, turning plate angle into intake and discharge stroke — the part that creates the pump's flow and pressure. This K3V280DT piston is from the Kawasaki K3V main-pump series used on large crawler excavators of roughly 50 tonnes and up. Each pump runs a matched set, so replace the pistons together.

When to replace

Worn, scored or sticking pistons let the pump bypass oil internally: weak power, slow boom lift, oil heating, noise and pressure loss under load. Loose or pitted shoes also add metal debris to the oil.

Choosing quality parts

Correct code, correct fit and proper surface hardness keep the pump holding pressure. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine Kawasaki and JIC K3V280DT pistons; JIC machines them to code and to the block clearance, so they go into an original pump untouched, with fast quotes.

Frequently asked questions

Which excavators use the K3V280DT piston?

The K3V280DT piston set belongs to the Kawasaki K3V main pump, fitted to large crawler excavators of about 50 tonnes and up. Send Việt Trung Hải your machine and pump code and we will confirm the right set and quote quickly.

Should I replace one piston or the whole set?

Replace the full piston set. The pistons run together and wear evenly, so fitting a single new one risks uneven loading, internal bypass and shorter pump life. A matched set keeps the pump holding pressure reliably.

What should I go by when choosing K3V280DT pistons?

The pump code and the state of the block: correct K3V280DT code, correct diameter and surface hardness, and an evenly matched set so the rotating group carries load without bias. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC pistons to code along with genuine Kawasaki parts and advice on the block.

Get a quote

Request a quote: Piston – Kawasaki K3V280DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides