
Ball guide – Rexroth-Uchida A10V71
Quick answer
The Rexroth-Uchida A10V71 ball guide and port plate keep the piston shoes at the right angle against the swash plate; they fit A10V axial-piston pumps used on compact-to-mid excavators and mobile hydraulic equipment.
Việt Trung Hải supplies the correct code in genuine and JIC form, machined to interchange tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10V71
- Condition
- New, correct code
- Availability
- On request
What the A10V71 ball guide & port plate does
The Rexroth-Uchida A10V71 ball guide and port plate steer and hold the piston shoes at the correct angle against the swash plate throughout the pump's rotation. They belong to the A10V axial-piston pump family, typically fitted on compact-to-mid class excavators and mobile hydraulic equipment. The ball guide locates the shoes; the port plate is the sealing face that ports oil in and out.
When to replace
A scored, pitted or unevenly worn port plate face causes internal leakage, weak flow, pressure loss and slow response under load. A worn ball guide lets the piston shoes tilt and chatter. Metal particles in the hydraulic oil are a clear sign to open the assembly and inspect.
Genuine-quality parts
This assembly needs flat, hard, precisely sized faces, and JIC parts are cut to exactly that. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the A10V71 ball guide and port plate to code and to interchange tolerance — they go into the original housing with no fitting work. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the A10V71 ball guide & port plate fit?
It belongs to the Rexroth-Uchida A10V axial-piston pump family, commonly found on compact-to-mid excavators and mobile hydraulic equipment. Send us your pump code or machine model and Việt Trung Hải will confirm the exact part before quoting.
When should the ball guide and port plate be replaced?
Replace them when the pump goes weak, loses pressure, runs slow under load or overheats, or when metal particles appear in the oil. On teardown you usually find a scored port plate face and a worn ball guide.
Does the JIC A10V71 set need any machining to fit?
No. The JIC ball guide and port plate carry the A10V71 code, the right material and surface hardness, and are machined to interchange tolerance, so they go into the original Rexroth-Uchida housing as they are. Việt Trung Hải is an authorized JIC Hydraulics distributor.
Get a quote
Request a quote: Ball guide – Rexroth-Uchida A10V71
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VValve plate – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V45A10V45On requestView · get a quoteTechnical handbook