Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Rexroth A10V71

Uchida/Rexroth · A10V

Valve plate – Rexroth A10V71

New, correct codeOn requestA10V71

Quick answer

The A10V71 valve plate is the porting plate against the cylinder block that times each piston's intake and discharge on the Rexroth-Uchida A10V/A10VO (size 71) piston pump, used on mini and compact excavators and industrial hydraulics.

Việt Trung Hải supplies high-quality, correctly-coded JIC parts with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10V71
Condition
New, correct code
Availability
On request

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge in the pump. On the Rexroth-Uchida A10V71 piston pump it carries the full pressure difference between the intake and discharge ports, so flatness and surface finish are critical to output.

Which pump the A10V71 fits

The A10V71 belongs to the Rexroth A10V/A10VO axial-piston family (size 71, built under licence by Uchida), typically the main pump on mini and compact excavators and in many industrial hydraulic systems. The plate sits between the cylinder block and pump housing under constant high-pressure flow.

Signs it needs replacing

Scoring, pitting or wear grooves from metal debris widen the sealing clearance, so oil leaks internally: the pump loses pressure, feels weak, slows and runs hot. Discoloration or blue heat marks signal overheating; replace early to protect the cylinder block.

Choosing quality parts

Fit a correctly-coded A10V71 valve plate, precision-lapped for a tight seal. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC A10V71 plate is the right part by code — hardened material, precise machining, interchange tolerances held — so it goes straight into the original pump instead of being bored or lapped on the bench. Genuine plates are kept here as well. Contact us for a fast quote.

Frequently asked questions

Which pump and machine does the A10V71 valve plate fit?

The A10V71 valve plate fits Rexroth-Uchida A10V/A10VO axial-piston pumps in size 71, typically the main pump on mini and compact excavators and industrial hydraulic systems using this pump family.

How do I know the valve plate is worn and needs replacing?

If the pump loses pressure, feels weak, is slow and runs hot, the valve plate is likely scored or grooved and leaking internally. Discoloration or blue heat marks on its face also mean it should be replaced soon.

Will the JIC A10V71 plate fit a standard pump?

It will. Việt Trung Hải is an authorized JIC Hydraulics distributor, and the JIC A10V71 plate is made to the correct code and interchange tolerances, hardened and ground flat, so it runs as soon as it is in. Contact us for a fast quote.

Get a quote

Request a quote: Valve plate – Rexroth A10V71

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides