
Retainer plate – Rexroth-Uchida A10V71
Quick answer
The Rexroth-Uchida A10V71 port plate is a lapped valve plate behind the cylinder block that routes oil and separates high- and low-pressure sides in A10V-family axial-piston pumps on compact and small excavators.
Việt Trung Hải supplies genuine and JIC A10V71 plates to the same code and finished tolerance, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10V71
- Condition
- New, correct code
- Availability
- On request
What the A10V71 port plate does
The port plate (valve plate) is a precision-lapped disc behind the cylinder block of the Rexroth-Uchida A10V71 axial-piston pump. Its kidney-shaped ports route oil in and out as pistons stroke, separating the high- and low-pressure sides while the block rotates. The A10V71 belongs to the A10V main/variable pump family used on compact and small excavators.
When to replace
Scoring, wear grooves, or pitting at the port edges are the first signs. Burn discoloration points to overheating from internal leakage. A worn plate loses its sealing gap, so the pump drops pressure and the machine runs slow and hot; metal fines in the oil often follow.
Choosing quality
A correct-spec plate needs good steel, a flat lapped face, and proper surface hardness. Việt Trung Hải carries the A10V71 as a genuine part and, being JIC Hydraulics' authorized distributor, as a JIC part — the JIC face comes finished to the same tolerance, so it holds pressure from the first turn with nothing to re-lap. Fast quotes.
Frequently asked questions
Which pump and machine does the A10V71 port plate fit?
The A10V71 port plate fits Rexroth-Uchida A10V-family axial-piston pumps, the main/variable pumps used on compact and small excavators and mobile hydraulic equipment. Send us your pump code or machine model and Việt Trung Hải will confirm the exact part before quoting.
How do I know the port plate is worn?
Check the sealing face for deep scoring, wear grooves, pitted port edges, or burn discoloration. These usually come with pressure loss, weak and slow machine operation, oil overheating, and metal fines in the hydraulic oil.
Can a lightly worn A10V71 plate be lapped, or does it need changing?
Lapping only clears very shallow scoring; grind it down and you lose thickness, the clearance opens up and the pump drops pressure again within hours. With the pump already apart, a new plate is the better call. Việt Trung Hải has the A10V71 in genuine and JIC to the same code, ready to go straight into the original housing.
Get a quote
Request a quote: Retainer plate – Rexroth-Uchida A10V71
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VValve plate – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10V71A10V71On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V45A10V45On requestView · get a quoteTechnical handbook