
Retainer plate – Kayaba PSV2 60T
Quick answer
The Kayaba PSV2 60T port plate is the fixed oil-distribution plate inside the PSV2 (KYB) main piston pump used on ~13–16 tonne excavators; with the ball guide it keeps the piston shoes correctly angled and routes oil in and out as the cylinder block turns.
Việt Trung Hải supplies JIC parts on the original code and genuine stock, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSV2
- Condition
- New, correct code
- Availability
- On request
Kayaba PSV2 60T port plate — which pump it fits
The port plate is the fixed plate the cylinder block rides against inside the piston pump. With the ball guide it holds the piston shoes at the correct angle on the swash plate and distributes oil in and out through kidney ports as the block rotates. This PSV2 60T port plate suits the Kayaba (KYB) PSV2 main pump used on ~13–16 tonne excavators.
Signs it needs replacing
Deep scoring, pitting or heat discoloration on the sealing face are the clearest signs. As flatness is lost, internal leakage rises — weak pump, pressure loss, slow lift, sluggish throttle response and oil that heats up faster than normal. Check the ball guide and piston shoes at the same time.
Choosing quality
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC port plates for PSV2 pumps on the original code, so the pump comes back to its rated flow after assembly. Genuine Kayaba plates are stocked too. Contact us for the right part and a fast quote.
Frequently asked questions
Which excavator does the PSV2 60T port plate fit?
PSV2 is Kayaba (KYB) main pump for roughly 13–16 tonne excavators, and the PSV2 60T port plate fits that pump unit. Send your pump code and machine serial and Việt Trung Hải will confirm the exact part before quoting.
When should a PSV2 port plate be replaced?
Replace it when the sealing face shows deep scoring, pitting or heat discoloration and the pump feels weak, loses pressure, lifts slowly or overheats. Inspect the ball guide and piston shoes at the same time, as they wear together.
How do I tell whether my pump takes the PSV2 60T plate?
The code stamped on the pump body identifies the PSV2 version. Send it to Việt Trung Hải with a photo of the old plate; as an authorized JIC Hydraulics distributor we match the number and ship the correct 60T plate in JIC or genuine, each on the original code, and quote fast.
Get a quote
Request a quote: Retainer plate – Kayaba PSV2 60T
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 63TPSV2On requestView · get a quoteTechnical handbook