
Rotary group – Kayaba PSV2-55T
Quick answer
The Kayaba PSV2-55T rotary group is the complete rotating assembly (cylinder block, pistons, valve plate, swash plate, drive shaft) of the KYB PSV-series main pump, fitted on roughly 13–16 tonne excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC units built to the correct code — fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSV2
- Condition
- New, correct code
- Availability
- On request
What the PSV2-55T rotary group fits
The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure. The Kayaba (KYB) PSV2-55T is a complete rotary group for the PSV-series main pump used on roughly 13–16 tonne excavators.
When to replace
A worn rotary group shows up as a weak machine, slow lifting and lost power under load. Look for scoring on the valve plate and cylinder block face, loose piston shoes, internal leakage and pressure drop, plus whining noise, fast-heating oil and metal particles in the oil.
Genuine-quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC PSV2-55T rotary group follows the drawing for the code — splines matched to the shaft, block sized to the bore, valve-plate clearance on spec — so it goes into a standard Kayaba housing and runs correctly with no fitting. Genuine units are stocked alongside. Contact us for the right pump version and a fast quote.
Frequently asked questions
Which excavator does the PSV2-55T rotary group fit?
It is the rotary group for the Kayaba (KYB) PSV-series main pump used on roughly 13–16 tonne excavators. Send us your pump code or a photo of the pump label so we can confirm the exact fit before you order.
Should I replace the whole rotary group or single parts?
Because the cylinder block, pistons, valve plate and swash plate wear together, replacing the complete rotary group keeps clearances and sealing even. The pump builds pressure more reliably and lasts longer than swapping single worn parts.
What is in a PSV2-55T rotary group?
Cylinder block, pistons, shoe plate, valve plate and drive shaft — supplied as a set so clearances stay even after assembly. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC PSV2-55T is built to the code and runs correctly in a standard Kayaba housing. Genuine units are stocked as well.
Get a quote
Request a quote: Rotary group – Kayaba PSV2-55T
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 63TPSV2On requestView · get a quoteTechnical handbook