
Valve plate – Kayaba PSV2 55T
Quick answer
The Kayaba PSV2-55T valve plate is the high/low pressure porting plate inside PSV-series main pumps, typically fitted on ~13–16 tonne excavators. When it scores or wears, the pump loses pressure.
Việt Trung Hải keeps genuine and JIC plates to code that go into a standard pump and make full pressure, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSV2
- Condition
- New, correct code
- Availability
- On request
What the Kayaba PSV2-55T valve plate fits
The valve plate is the porting plate pressed against the cylinder block; it times each piston's intake and discharge. The PSV2-55T serves Kayaba (KYB) PSV-series main piston pumps used on excavators in the ~13–16 tonne class. A flat, well-sealed plate with correct port geometry is what lets the pump hold pressure and flow.
Signs of wear
As the face scores, pits or loses flatness, oil leaks internally: the pump loses pressure and the machine feels weak and slow. Watch for scratch marks, heat discoloration, a worn bronze layer exposing steel, and fast-heating oil — replace the plate together with the cylinder block.
Choosing quality
Material, flatness and surface finish decide service life. Việt Trung Hải keeps PSV2-55T plates from Kayaba and from JIC Hydraulics — the JIC plate comes out to code and inside interchange tolerance, so a standard PSV pump makes full pressure once it is back together. Send your pump code for a fast quote.
Frequently asked questions
Which excavators use the PSV2-55T valve plate?
It fits Kayaba PSV-series main piston pumps on excavators around the 13–16 tonne class. Send your pump code and machine model and Việt Trung Hải will confirm the correct part and quote quickly.
How do I know the valve plate is worn?
Common signs are pressure loss, a weak and slow machine, and fast-heating oil. On inspection, a scored, pitted, burnt or uneven sealing face means it should be replaced, ideally together with the cylinder block.
Will a JIC plate still seal in a PSV2-55T pump that has run for years?
It will, as long as the block face is still flat. The JIC plate comes out to the PSV2-55T code and inside interchange tolerance, so it holds pressure against the block; a block worn hollow or with lifted bronze has to be sorted first. Send the pump code and Việt Trung Hải will check it and quote.
Get a quote
Request a quote: Valve plate – Kayaba PSV2 55T
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 63TPSV2On requestView · get a quoteTechnical handbook