
Valve plate – Kayaba PSV2 63T
Quick answer
The Kayaba PSV2-63T valve plate is the high/low-pressure porting plate inside the KYB PSV2 main pump, fitted to excavators in the roughly 13–16 tonne class.
Việt Trung Hải keeps genuine and JIC Hydraulics plates to code that fit the standard housing and run right — fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSV2
- Condition
- New, correct code
- Availability
- On request
What the Kayaba PSV2-63T valve plate does
The valve plate is the porting plate pressed against the cylinder block; it times each piston's intake and discharge of high- and low-pressure oil. On the Kayaba (KYB) PSV2-63T main pump — an axial-piston unit for excavators in the roughly 13–16 tonne class — this face works under constant high pressure and keeps flow stable.
When to replace
Scoring, pitting or cavitation at the kidney ports signals wear. A valve plate that loses flatness raises internal leakage: the pump goes weak, boom and bucket slow down, oil heats quickly and metal debris appears. Left unchecked, the cylinder block and pistons wear too.
Choosing quality parts
A valve plate needs hard material, a lapped-flat face and fine surface finish. Việt Trung Hải supplies Kayaba PSV2-63T plates, genuine and from JIC Hydraulics — the JIC plate is machined to code with the face lapped inside interchange tolerance, so it goes into the existing pump housing and runs right with no bench work. Contact us for a fast quote.
Frequently asked questions
Which excavator does the PSV2-63T valve plate fit?
The PSV2-63T is a Kayaba main pump for excavators in the roughly 13–16 tonne class. The valve plate sits inside this pump; when replacing it, also check the cylinder block and pistons so the sealing face stays tight.
How do I know the valve plate is worn?
Common signs are a weak pump, slow boom and bucket, oil heating quickly and metal debris in the oil. On teardown, scoring, pitting or cavitation at the kidney ports means the plate should be replaced before damage spreads to the block and pistons.
Can a worn PSV2-63T plate be lapped, or does it have to be changed?
Light, even scoring can be lapped out for a while, but a face worn hollow, pitted or heat-discoloured only gets thinner with lapping and has to go. Việt Trung Hải keeps PSV2-63T plates, genuine and JIC, to code — send the pump code and we will quote.
Get a quote
Request a quote: Valve plate – Kayaba PSV2 63T
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 60TPSV2On requestView · get a quoteTechnical handbook