
Ball guide – Komatsu HPV75
Quick answer
The Komatsu HPV75 ball guide steers and presses the piston shoes to the correct angle against the swash plate in the HPV axial-piston main pump, fitted on mid-size Komatsu PC excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine and JIC HPV75 ball guides to the correct code and interchange tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV75
- Condition
- New, correct code
- Availability
- On request
What the HPV75 ball guide fits
The ball guide steers and presses the piston shoes so they sit at the correct angle against the swash plate throughout the pump's rotation. Part HPV75 belongs to Komatsu's HPV axial-piston main-pump family, fitted on mid-size Komatsu PC excavators — sitting between the ~13t class (HPV55) and the PC200 ~20t class (HPV90/95).
Signs it needs replacing
A worn ball guide lets the shoes tilt off the swash plate: weak, slow digging, low lift, more internal leakage and heat, and knocking or vibration inside the pump. Pitting or scoring on the ball surface, or excess clearance, means it is time to inspect and replace the assembly.
Choosing quality parts
Correct sphere geometry, good material and a hard, precise finish keep the shoes square and protect the swash plate and block. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC HPV75 ball guide is cut to interchange tolerance and seats straight into the original block, with no boring or lapping. Genuine Komatsu parts are on the shelf too. Send your pump code for a fast quote.
Frequently asked questions
Which pump and machine does the HPV75 ball guide fit?
It fits Komatsu's HPV axial-piston main pump on mid-size Komatsu PC excavators. Within the family, HPV55 sits in the ~13t class and HPV90/95 runs on the PC200 ~20t class, with HPV75 in between. Send your machine number and VTH will confirm the exact assembly.
When should the ball guide be replaced?
When the pump grows weak, digs slowly, loses lift, leaks internally, overheats or knocks. On teardown, pitting, scoring or excess clearance that lets the piston shoes tilt off the swash plate means the assembly should be replaced.
Does a JIC ball guide need machining to fit an HPV75?
No. The JIC ball guide is made to the HPV75 code and to interchange tolerance, so it seats in the original block as it comes — no boring, no lapping. Việt Trung Hải is an authorized JIC Hydraulics distributor and stocks genuine parts as well. Send your pump code for a fast quote.
Get a quote
Request a quote: Ball guide – Komatsu HPV75
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPin – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVCylinder block – Komatsu HPV75HPV75On requestView · get a quoteTechnical handbook