
Retainer plate – Komatsu HPV75
Quick answer
The HPV75 port plate is the fixed valve plate in Komatsu's HPV main pump, sealing and porting suction and discharge oil as the cylinder block rotates — fitted on medium-class excavators. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the JIC HPV75 plate to the correct code, lapped to fit tolerance so it seals in the original pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV75
- Condition
- New, correct code
- Availability
- On request
What the HPV75 port plate fits
The port plate is the fixed valve plate between the cylinder block and the pump's rear cover. Its lapped face carries two kidney-shaped ports that separate suction and discharge oil, and the rotating block seals against it through every stroke — making it a critical sealing surface inside the piston group.
This HPV75 port plate suits the Komatsu HPV main pump family — axial-piston pumps used on medium-class crawler excavators, sitting between the compact HPV55 and the PC200-class HPV90/95.
Wear signs and quality
A worn plate shows scoring, pitting or blue heat marks on the lapped face, causing internal leakage, pressure loss, slow and weak operation, and hot oil. Replace it and inspect the cylinder block together. Việt Trung Hải sells the HPV75 plate genuine, and as an authorized JIC Hydraulics distributor also supplies the JIC plate — right code, lapped to fit tolerance, sealing against the block from the first start. Contact us for a fast quote.
Frequently asked questions
Which excavator does the HPV75 port plate fit?
The HPV75 port plate belongs to Komatsu's HPV axial-piston main pump family for medium-class excavators. The range spans the compact HPV55 up to the PC200-class HPV90/95; send us your pump code and machine model and we'll confirm the exact part.
How do I know the port plate is worn?
Check the lapped face: scoring, pitting or blue heat marks mean it has lost flatness and no longer seals well. On the machine you'll see pressure loss, slow and weak lifting, and oil heating up fast. Replace it and inspect the cylinder block together.
Do I have to change the cylinder block when I fit a new HPV75 plate?
Usually not. If the block face is still flat and free of deep pitting, a new plate on its own brings the seal back. The JIC HPV75 plate Việt Trung Hải distributes is made to the same code and fit tolerance, so it beds against the used block straight away. If the block is deeply scored or worn unevenly, send photos and we will check it with you.
Get a quote
Request a quote: Retainer plate – Komatsu HPV75
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPin – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVBall guide – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVCylinder block – Komatsu HPV75HPV75On requestView · get a quoteTechnical handbook