Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Shoe plate – Komatsu HPV75

Komatsu · HPV

Shoe plate – Komatsu HPV75

New, correct codeOn requestHPV75

Quick answer

The HPV75 shoe plate holds the piston shoes flat against the swash plate in the Komatsu HPV75 main pump (PC120-class, ~12–13 t), keeping them seated and evenly loaded through each stroke.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Shoe plate
Brand / pump line
Komatsu · HPV
Model code
HPV75
Condition
New, correct code
Availability
On request

What the HPV75 shoe plate is and where it fits

The shoe plate — the shoe retainer or hold-down plate — presses the piston shoes flat against the swash plate as the cylinder block turns, keeping every shoe seated and evenly loaded through each stroke. It works inside the Komatsu HPV75 main pump, the axial-piston unit on mid-size PC120-class crawler excavators of roughly 12–13 tonnes. It holds the shoes; it is not the swash plate and does not set displacement.

Signs of trouble

A worn or cracked plate, or one that no longer holds the shoes down, lets them tilt and lift off the swash plate. The oil-film seal breaks and internal leakage builds: a weak pump, slow digging and boom lift, unstable flow, hot oil, odd noise and metal in the fluid. Left too long, the shoes and swash plate get damaged too.

Choosing the right part

Order by code HPV75. The plate must stay flat, hard enough and hold even hold-down force so no shoe lifts. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine plates and JIC-coded plates machined to the interchange tolerances, so hold-down force is right the moment one goes into a standard HPV75 group. Fast quote.

Frequently asked questions

Is the HPV75 shoe plate the same as the swash plate?

No. The shoe plate holds the piston shoes down against the swash plate; the swash plate is the separate angled plate that sets displacement.

When should I replace the HPV75 shoe plate?

When the pump weakens, flow is unstable, oil overheats, you hear noise or find metal debris — signs the shoes are lifting and leaking as the plate wears.

Does an HPV75 shoe plate need fitting work?

No. A JIC-coded plate is built to the HPV75 interchange tolerances and holds the correct shoe load in a standard group, with nothing to lap.

Get a quote

Request a quote: Shoe plate – Komatsu HPV75

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides