
Valve plate – Komatsu HPV75
Quick answer
The HPV75 valve plate is the porting plate that times each piston's intake and discharge in the Komatsu HPV75 main pump, fitted to Komatsu excavators in the ~13-tonne class (PC120/PC130 family).
Việt Trung Hải supplies genuine and JIC plates cut to code that fit a standard pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV75
- Condition
- New, correct code
- Availability
- On request
Valve plate for the Komatsu HPV75 pump
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. On the Komatsu HPV75 main pump — fitted to Komatsu excavators in the ~13-tonne class (PC120/PC130 family) — it sits between the block and the pump cover, routing oil through the two kidney ports.
Signs it needs replacing
Running under heavy load with constant sliding contact, the plate scores, pits, discolours or wears unevenly. The machine loses power, boom and swing slow down, oil overheats and the pump can whine. Deep scoring or flaking of the hardened layer means replace it before the cylinder block is damaged.
Choosing quality parts
The plate going in must match the HPV75 code and be flat, smooth and surface-hardened. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine Komatsu plates and JIC plates — the JIC part is cut to code and interchange tolerance, so the kidney ports line up in the original pump cover and it runs right from the first start. Call us for a fast quote.
Frequently asked questions
Which excavator uses the HPV75 valve plate?
It is the valve plate for the Komatsu HPV75 main pump, fitted to Komatsu excavators around the 13-tonne class in the PC120/PC130 family. Việt Trung Hải confirms the pump version and part code before shipping so the plate fits correctly.
Can I replace only the valve plate and keep the old cylinder block?
If the block is still flat and not deeply scored, the plate can be replaced on its own. Worn plates often come with an early-failing block, so check both; VTH advises a matched set when needed for lasting performance.
Do any seals need changing along with a JIC HPV75 plate?
Renew the pump cover seals while it is open, since the old ones have hardened. The plate itself is made to the HPV75 code, flat and surface-hardened, and held to interchange tolerance, so it needs no shims or fitting. Việt Trung Hải carries genuine Komatsu and JIC plates and quotes fast.
Get a quote
Request a quote: Valve plate – Komatsu HPV75
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPin – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVBall guide – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVCylinder block – Komatsu HPV75HPV75On requestView · get a quoteTechnical handbook