Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Ball guide – Kayaba MAG150

Kayaba (KYB) · MAG

Ball guide – Kayaba MAG150

New, correct codeOn requestMAG150

Quick answer

The Kayaba MAG150 ball guide and port plate hold the piston shoes against the swash plate and meter oil to each piston inside a KYB MAG-series excavator travel motor.

Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks the JIC set made to the MAG150 code, which beds into the standard motor and seals, plus genuine parts, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kayaba (KYB) · MAG
Model code
MAG150
Condition
New, correct code
Availability
On request

Kayaba MAG150 ball guide & port plate — what it fits

The ball guide and port plate steer and hold the piston shoes at the correct angle against the swash plate as the rotating group turns. This set sits inside the Kayaba (KYB) MAG-series travel motor, part MAG150 — the drive unit that powers an excavator's track. The ball guide locates the shoes; the port plate meters oil in and out of each piston.

Signs of wear

Weak or uneven travel with one track lagging, scoring or pitting on the port-plate face, internal leakage and pressure loss, a knock from a worn ball guide, and a motor that heats up under load.

Choosing quality parts

Because this pair runs under constant load and sliding, material, surface hardness and flatness set its service life. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC MAG150 ball guide and port plate made to that code, the port face ground flat within interchange limits, so the set beds into the standard motor and seals without hand lapping. Genuine Kayaba stock is available as well. Contact Việt Trung Hải to match your machine version and get a fast quote.

Frequently asked questions

Which motor does the MAG150 ball guide fit?

The MAG150 ball guide and port plate set fits inside a Kayaba (KYB) MAG-series travel motor that drives an excavator's track. Send your machine model and motor code and Việt Trung Hải will confirm the exact part and quote.

When should I replace the ball guide and port plate?

Replace them when travel is weak or pulls to one side, the motor overheats, or the port-plate face is scored or pitted, causing internal leakage and pressure loss. A worn ball guide lets the shoes tilt and knock.

Does the JIC MAG150 set need the port face lapped in?

No. The JIC port plate and ball guide are made to the MAG150 code with flatness inside interchange limits, so the set beds into the standard motor and seals as installed. Việt Trung Hải is an authorized JIC Hydraulics distributor, checks the machine version before dispatch and quotes fast.

Get a quote

Request a quote: Ball guide – Kayaba MAG150

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides