
Swash plate – Kayaba MAG150
Quick answer
The MAG150 swash plate is the fixed angled plate in a MAG-series travel motor; the piston shoes slide and push against it, and its tilt sets displacement, so track torque and speed.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Swash plate
- Brand / pump line
- Kayaba (KYB) · MAG
- Model code
- MAG150
- Condition
- New, correct code
- Availability
- On request
What the Kayaba MAG150 swash plate fits
The MAG150 swash plate is the fixed, angled plate inside the motor; the piston shoes slide across its face and push against it to make the unit turn. Its tilt sets the piston stroke, so it governs the motor's displacement — and thus the track's pulling force and speed. This part sits in a Kayaba (KYB) MAG-series travel motor, which drives the track through the final drive on crawler excavators.
When to replace
A worn plate shows up as the machine tracking to one side, one track weak or slow, or the motor short on power on slopes. Look for deep scoring, pitting or a worn hollow where the shoes no longer seal, plus metal debris in the oil and knocking inside the unit. If so, inspect and replace the swash plate together with the piston shoes.
Choosing a quality part
A correct MAG150 plate needs a hardened steel body and a flat, smooth face at the right angle to hold pressure steady and not chew the shoes. JIC Hydraulics cuts this code to the same angle, the same surface hardness and the same fitting dimensions, so it seats in a standard Kayaba motor housing with nothing to lap. Việt Trung Hải distributes JIC under authorization and keeps genuine Kayaba parts on hand. Call VTH for a fast quote and the right match.
Frequently asked questions
Where is the MAG150 swash plate?
In a Kayaba (KYB) MAG-series travel motor that drives the track through the final drive.
Can a worn plate make the machine track sideways?
Yes; a worn plate weakens or slows that track, so the machine pulls to one side and lacks power on slopes.
Is the JIC plate cut to the same angle as the factory part?
Yes. JIC machines the MAG150 to the same angle and surface hardness, so track torque and speed stay as designed. VTH also stocks genuine Kayaba parts.
Get a quote
Request a quote: Swash plate – Kayaba MAG150
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · MAGTravel motor rotary group – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGRetainer plate – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGValve plate – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGPiston – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGBall guide – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGCylinder block – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGTravel motor rotary group – Kayaba MAG170MAG170On requestView · get a quote
Kayaba (KYB) · MAGRetainer plate – Kayaba MAG170MAG170On requestView · get a quoteTechnical handbook