
Retainer plate – Rexroth-Uchida A10VD43
Quick answer
The Rexroth (Uchida) A10VD43 port plate is part of the ball-guide and port-plate group, holding the piston shoes on the swash plate and giving the cylinder block a sealed face to rotate on. It fits the main pump of small excavators such as the Sumitomo SH60/SH75.
Việt Trung Hải supplies genuine and JIC parts for the A10VD43 to the same code and tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10VD43
- Condition
- New, correct code
- Availability
- On request
What the A10VD43 port plate does
The Rexroth (Uchida) A10VD43 port plate is part of the ball-guide and port-plate group inside an axial-piston pump. It keeps the piston shoes seated at the right angle on the swash plate and gives the cylinder block a sealed face to rotate on while oil flows through its ports. The A10VD43 is a small-excavator main pump, typically the Sumitomo SH60/SH75 class.
When to replace it
A scored, pitted or worn face lets oil slip across the gap, so the pump loses pressure, lifts and slews weakly and runs hot. Contamination in the oil leaves fan-shaped scratches on the sealing face.
Choosing the right part
Flatness, material and surface hardness set its life. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC plates for the A10VD43, cut to the code and fit tolerance, so they run correctly in the original Sumitomo SH60/SH75 pump with no reaming or lapping. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A10VD43 port plate fit?
The A10VD43 is a main piston pump on small excavators, typically the Sumitomo SH60/SH75 class and similar Kobelco machines. The port plate sits inside that pump. Send your pump code and machine model and Việt Trung Hải will confirm the exact part.
How do I know the port plate is worn?
A worn port plate usually makes the pump lose pressure, lift and slew weakly and run hot, with more return flow. If the sealing face looks scored, pitted or worn through, replace it. Fitting the correct part prevents damage spreading to the pistons and swash plate.
Does the JIC A10VD43 plate match the original thickness and port layout?
It does. Việt Trung Hải is an authorized JIC Hydraulics distributor, and JIC machines the part to the A10VD43 code — thickness, port layout and fit tolerance all follow the original drawing, so it seats at the correct clearance in a standard housing. Contact us for advice and a fast quote.
Get a quote
Request a quote: Retainer plate – Rexroth-Uchida A10VD43
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VDrive shaft – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VSwash plate – Uchida/Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VShoe plate – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VValve plate – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VPin – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10VD43A10VD43On requestView · get a quoteTechnical handbook