
Valve plate – Rexroth A10VD43
Quick answer
The A10VD43 valve plate is the high/low-pressure porting plate for the Rexroth-Uchida A10V main pump used on mini and compact excavators, timing each piston's intake and discharge.
Việt Trung Hải carries genuine and JIC plates cut to code and to the interchange tolerances, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10VD43
- Condition
- New, correct code
- Availability
- On request
What the A10VD43 valve plate does
The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. This Rexroth-Uchida A10VD43 part fits the A10V main pump — a tandem unit typically found on mini and compact excavators. It carries the harshest sliding wear in the pump, so its condition drives the flow and pressure the pump can deliver.
When to replace
A worn valve plate shows deep scoring, arc-shaped grooves, or heat-burnt patches on the sliding face; the wear coating flakes and the kidney ports erode, letting oil leak from high to low pressure. On the machine you see a weak pump, slow cylinders, power loss under load, fast-heating oil, and metal debris.
Choosing quality
Buy to the correct code, flat and true, with a hard coating that holds clearance. Việt Trung Hải — an authorized JIC Hydraulics distributor — carries the A10VD43 plate in genuine and JIC form. The JIC plate is cut to the same code and interchange tolerances, so it mates with the used pump exactly and leaves the mechanic nothing to adjust. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A10VD43 valve plate fit?
The A10VD43 belongs to the Rexroth-Uchida A10V main pump, a tandem unit common on mini and compact excavators. Match your pump code and the casting number on the old plate; Việt Trung Hải can help confirm the right part.
How do I know the valve plate is worn out?
On teardown the sliding face shows deep scoring, grooves, or burnt patches and a flaking coating. On the machine the pump feels weak, cylinders slow, power drops under load, oil heats fast, and metal debris in the oil means replace it.
How is the JIC A10VD43 plate different from unbranded stock?
The JIC plate Việt Trung Hải distributes is cut to the A10VD43 code with controlled material, coating and flatness, and it holds the interchange tolerances, so it seals in the original pump. Unbranded parts give you no guarantee on any of that. Contact us for a fast quote.
Get a quote
Request a quote: Valve plate – Rexroth A10VD43
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VDrive shaft – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VSwash plate – Uchida/Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VShoe plate – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VPin – Rexroth-Uchida A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10VD43A10VD43On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10VD43A10VD43On requestView · get a quoteTechnical handbook